parts catalog

SEAL-PISTON 2333891 - Caterpillar

2333891 SEAL-PISTON Caterpillar parts SEAL
Alternative (cross code) number:
Caterpillar 2333891 SEAL-PISTON

Buy SEAL-PISTON 2333891 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 1 g01347490
(1) Adapter assembly (2) Drive gear (3) Idler gear assembly (4) Pump adapter (5) Crankshaft gear
Illustration 2 g01347492
(A) Install the bearing joint at the following angle. ... 37.5 1.0 degreesNote: Measure angle (A) from the centerline of the two bolts of the adapter housing.Note: The relief in the bearing must line up with the relief in the gear within 2 degrees. The bearing must not extend beyond either face of the gear.
Illustration 3 g01347494
(C) Install the bearing joint at the following angle. ... 15 1 degreesNote: Measure angle (B) from the vertical center line of the adapter housing.
Illustration 4 g01347495
Section B-B (D) Outside diameter of the sleeve bearing before installation ... 69.952 0.020 mm (2.7540 0.0008 inch) (E) Distance from the end of the sleeve bearing to the edge of the adapter housing ... 3.5 0.5 mm (0.14 0.02 inch)

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.