AVSPARE.COM
parts catalog

SEAL-PISTON 2333900 - Caterpillar



2333900 SEAL-PISTON Caterpillar parts SEAL
Rating:
41
Alternative (cross code) number:
CA2333900
233-3900
2333900
Caterpillar 2333900 SEAL-PISTON

Buy SEAL-PISTON 2333900 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g00289596
(1) Torque for two bolts ... 41 7 N m (30 5 lb ft) (2) 112-8794 Pad Thickness of one brake pad ... 3.1 + 0.3 - 0.0 mm (.12 + .01 - .00 inch) Thickness of friction material ... 1.10 + 0.20 - 0.00 mm (.043 + .008 - .000 inch)Note: Replace the brake pads when the 0.5 mm (.02 inch) grooves are gone from the friction material. (3) 112-8795 Pad Thickness of one brake pad ... 4.2 + 0.3 - 0.0 mm (.17 + .01 - .00 inch) Thickness of friction material ... 1.10 + 0.20 - 0.00 mm (.043 + .008 - .000 inch)Note: Replace the brake pads when the 0.5 mm (.02 inch) grooves are gone from the friction material. (4) Torque for plug ... 160 20 N m (120 15 lb ft)Adjustment and Installation Procedure
Illustration 2 g00289733
Verify that lever (8) is installed in the support (7). The placement is shown in Illustration 1.
Install lever (6) to the shaft of lever (8) .
Place lever (8) in the vertical position. Place the square edge (D) on the housing. The placement is shown in Illustration 2. Align lever (8) with the square edge (D) .
Adjust lever (6) on the shaft in order to achieve dimension (C). Dimension (C) is 35 mm (1.4 inch).


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.