2333929 SEAL-ROD Caterpillar parts SEAL
Alternative (cross code) number:
Illustration 12 g00537396
Remove bolts (18) from each side of platform (19) .
Disconnect harness assemblies (20). This will disconnect the sensors of the radiator from the platform.
Illustration 13 g01017351
Disconnect hose assemblies (27), (29), and (33) .
Loosen hose clamp (31) and hose (26) .
Remove bolts (30) and gasket (28) (not shown). Remove lower drain elbow (32) in order to remove the radiator. Repeat this procedure on the other side of the radiator.
Illustration 14 g00537407
Disconnect harness assembly (42) .
Illustration 15 g00538584
Illustration 16 g00537416
Remove left cover (50) in order to access the bolts of platform assembly (19) .
Illustration 17 g00538578
Illustration 18 g00537417
Remove right cover (51) in order to access the bolts of platform assembly (19) .
Illustration 19 g01003224
Use Tooling (A) to remove platform assembly (19) from the machine. The weight of the platform assembly is approximately 230 kg (507 lb).
Illustration 20 g00537419
Position platform assembly (19) on the floor.
Illustration 21 g01045911
Remove bolts and gaskets from each of elbow assemblies (52), (53), (54), and (55) .
Remove bolts (60) and (61) .
Remove bolts (57) and the washers that secure the fan guard to the radiator.
Loosen hose clamps (56) and (58) .
Remove hose (59) .
Illustration 22 g00537422
Illustration 23 g00537424
Remove bolts (62) from each side of the radiator.
Illustration 24 g01003247
Illustration 25 g01017628
Use Tooling (A) and a suitable hoist to support radiator (63). The weight of the radiator is approximately 1205 kg (2657 lb). Remove the bolts (63A) from both sides of the radiator.
Illustration 26 g01003257
Remove radiator (63). For the protection of the radiator, move the radiator to a suitable location away from the work area.