AVSPARE.COM
parts catalog

SEAL-ROD 2333937 - Caterpillar



2333937 SEAL-ROD Caterpillar parts SEAL
Rating:
26
Alternative (cross code) number:
CA2333937
233-3937
2333937
Caterpillar 2333937 SEAL-ROD

Buy SEAL-ROD 2333937 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

145-7108 Torque Converter (Lockup) with Freewheel Stator
Illustration 1 g01115217
(1) Torque for the two bolts ... 105 15 N m (75 10 lb ft) (2) Lockup Clutch Total thickness of two new clutch plates and of two new friction discs ... 16.52 0.42 mm (0.650 0.016 inch) Thickness of one new 1T-1315 Clutch Plate ... 3.43 0.13 mm (0.135 0.005 inch) Thickness of one new 336-9313 Friction Disc ... 4.83 0.08 mm (0.190 0.003 inch) (3) Torque for the 24 bolts ... 105 15 N m (75 10 lb ft) (4) Clearance between the torque converter turbine and the torque converter housing across the diameter ... 1.80 0.38 mm (0.071 0.015 inch) (5) Impeller Clutch Total thickness of two new clutch plates and of three new friction discs ... 21.35 0.34 mm (0.840 0.013 inch) Thickness of one new 1T-1897 Clutch Plate ... 3.43 0.05 mm (0.135 0.002 inch) Thickness of one new 336-9318 Friction Disc ... 4.83 0.08 mm (0.190 0.003 inch) (6) Torque for the 36 bolts ... 60 7 N m (45 5 lb ft) (7) Torque for the 12 bolts ... 105 15 N m (75 10 lb ft) (8) 1T-0680 Spring (13) Working length ... 5.6 mm (0.22 inch) Force at working length ... 7.8 N (1.75 lb) Free length (minimum) ... 9.1 mm (0.3583 inch) Assembled radial length ... 9.1 0.5 mm (0.36 0.02 inch)Note: Assemble the springs for the freewheel stator with the maximum number of loops to the outside. (9) Torque for the eight bolts ... 60 7 N m (45 5 lb ft) (10) Lubricate the lip seal with a minimal amount of the lubricant that is being sealed. (11) Torque for the bolt ... 240 25 N m (175 20 lb ft) (12) Torque for the six bolts ... 60 7 N m (45 5 lb ft) (13) Clearance between the torque converter turbine and the torque converter stator across the diameter ... 0.81 0.26 mm (0.0319 0.0102 inch) (14) Clearance between the torque converter impeller and the torque converter housing across the diameter ... 1.25 0.33 mm (0.049 0.013 inch) (15) Clearance between the torque converter impeller and the torque converter stator across the diameter ... 0.81 0.26 mm (0.0319 0.0102 inch) (16) Torque for the 12 bolts ... 105 15 N m (75 10 lb ft) (17) Torque for the two bolts ... 60 7 N m (45 5 lb ft) (18) Torque for the eight bolts ... 30 5 N m (22 4 lb ft) (19) Lubricate the bore with a minimal amount of the lubricant that is being sealed. (20) Impeller Housing and Adapter Assembly Sleeve bearing inside diameter after installation in the adapter assembly ... 160.24


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.