AVSPARE.COM
parts catalog

238-6683 SEAT GP-SUSPENSION S/N B9K1-UP PART OF 233-3150 SEAT & MOUNTING GP ALSO AN ATTACHMENT 24M MOTOR GRADER




OPERATOR STATION

SEAT GP
 
#SEBP41051020
 

238-6683: SEAT GP-SUSPENSION

238-6683 SEAT GP-SUSPENSION
S/N B9K1-UP
PART OF 233-3150 SEAT & MOUNTING GP
ALSO AN ATTACHMENT
i02183360 SEBP4105
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. JZ [4] BLOCK-SLIDER  
2. 173-5787 J [4] SETSCREW (1/4-20-THD)  
3. 256-8768 Y [1] SUSPENSION GP-SEAT (AIR)  
4. 203-7703 J [2] WASHER-HARD (10.2X22.22X2.38-MM THK)  
5. 244-5001 Y [1] SEAT GP (CLOTH)  
6. 4F-4879 J [1] BOLT (3/8-16X0.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  173-7035 J [1] KIT-SLIDER BLOCK (SUSPENSION SEAT)  
    (INCLUDES WASHERS, BOLT, BLOCK SLIDERS & SETSCREWS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 
#SEBP41051021
 

421-1234: SEAT GP-SUSPENSION

421-1234 SEAT GP-SUSPENSION -CLOTH, AIR
S/N B9K1-UP
24-VOLT
PART OF 233-3150 SEAT & MOUNTING GP
ALSO AN ATTACHMENT
i06720339 SEBP4105
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-0345 Y [1] SEAT BELT GP (RETRACTABLE, 3-IN)  
2. 256-8768 Y [1] SUSPENSION GP-SEAT  
3. 489-6480 Y [1] SEAT GP (CLOTH, AIR)  
4. 173-7035 [1] KIT-SLIDER BLOCK (SUSPENSION SEAT)  
    (INCLUDES WASHERS, BOLT, BLOCK-SLIDER & SETSCREWS)
5. 498-4463 [1] KIT-LITERATURE HOLDER  
    (INCLUDES LANYARD, RETAINER, HOLDER & RIVET-POP)
  Y   SEPARATE ILLUSTRATION
 
#SEBP41051022
 

233-3224: SUPPORT GP-CONTROL

233-3224 SUPPORT GP-CONTROL -JOYSTICK, LH
S/N B9K1-598
PART OF 309-5955 CONTROL & MTG GP-JOYSTICK, 342-8961 SUPPORT GP-CONTROL
ALSO AN ATTACHMENT
i02178502 SEBP4105
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-1386 [1] SPACER (12.2X23X22-MM THK)  
2. 4E-8722 [10] NUT (RETAINER)  
3. 233-3227 [1] SUPPORT AS (LH)  
4. 233-3248 [2] BUSHING  
5. 233-3252 [1] SHAFT AS  
6. 360-6938 [1] SUPPORT AS (LH)  
  3K-6060 [1] LOCKNUT (3/8-16-THD)  
  4B-4280 [1] WASHER (13.5X27X2.5-MM THK)  
  241-3720 [1] FILM-WARNING (RECOIL SPRING)  
  295-2275 [1] KNOB AS (HEIGHT ADJUSTMENT)  
7. 252-1805 Y [1] CUSHION GP-ARM  
8. 252-1807 [1] SUPPORT AS (LH)  
  3G-0622 [2] RING-RETAINING  
  9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  7X-0605 [2] WASHER-HARD (13X28X1.6-MM THK)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  294-1001 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
9. 253-3482 [1] KNOB AS (ARMREST ADJUSTMENT)  
10. 253-3483 [1] PLATE AS  
11. 253-3484 [2] WASHER (13X46X3.5-MM THK)  
12. 272-8329 [1] BRACKET AS (LH)  
13. 308-4358 [1] PLATE AS  
  130-5300 [4] CLIP  
14. 5C-9553 M [2] BOLT (M6X1X16-MM)  
15. 7J-5925 [1] PIN-COTTER  
16. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
17. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
18. 8T-4908 M [7] BOLT (M8X1.25X25-MM)  
19. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
20. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
21. 8T-6936 D SEAL (0.1-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 
#SEBP41051023
 

233-3225: SUPPORT GP-CONTROL

233-3225 SUPPORT GP-CONTROL -JOYSTICK, RH
S/N B9K1-598
PART OF 309-5955 CONTROL & MTG GP-JOYSTICK, 342-8961 SUPPORT GP-CONTROL
ALSO AN ATTACHMENT
i02178511 SEBP4105
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-1386 [1] SPACER (12.2X23X22-MM THK)  
2. 4E-8722 [10] NUT (RETAINER)  
3. 360-6937 [1] SUPPORT AS (RH)  
  3K-6060 [1] LOCKNUT (3/8-16-THD)  
  4B-4280 [1] WASHER (13.5X27X2.5-MM THK)  
  241-3720 [1] FILM-WARNING (RECOIL SPRING)  
  295-2275 [1] KNOB AS  
4. 233-3248 [2] BUSHING  
5. 233-3252 [1] SHAFT AS  
6. 233-3270 [1] SUPPORT AS (RH)  
7. 233-3275 [1] BRACKET AS (RH)  
8. 252-1805 Y [1] CUSHION GP-ARM  
9. 252-1808 [1] SUPPORT AS (RH)  
9A. 3G-0622 [2] RING-RETAINING  
9B. 7X-0605 [2] WASHER-HARD (13X28X1.6-MM THK)  
9C. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
9D. 114-6658 [2] WASHER (6.5X17X1-MM THK)  
9E. 294-1001 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
10. 253-3482 [1] KNOB AS (ARMREST ADJUSTMENT)  
  164-1214 [1] KNOB  
11. 253-3483 [1] PLATE AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
12. 253-3484 [2] WASHER (13X46X3.5-MM THK)  
13. 5C-9553 M [2] BOLT (M6X1X16-MM)  
14. 7J-5925 [1] PIN-COTTER  
15. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
16. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
17. 8T-4908 M [7] BOLT (M8X1.25X25-MM)  
18. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
19. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
20. 308-4358 [1] PLATE AS  
  130-5300 [4] CLIP  
21. 8T-6936 D SEAL (0.1-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 
#SEBP41051024
 

342-8961: SUPPORT GP-CONTROL

342-8961 SUPPORT GP-CONTROL
S/N B9K341-598
PART OF 266-7002, 387-5575 PLATFORM GP-OPERATOR
ALSO AN ATTACHMENT
i03655405 SEBP4105
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 140-5945 [1] FILM-IDENTIFICATION (HORN)  
2. 233-3224 Y [1] SUPPORT GP-CONTROL (JOYSTICK, LH)  
3. 233-3225 Y [1] SUPPORT GP-CONTROL (JOYSTICK, RH)  
4. 251-2247 [2] GROMMET  
5. 251-2272 [1] COVER  
6. 251-2273 [1] COVER  
7. 251-2274 [1] COVER  
8. 251-2275 [1] COVER  
9. 280-7477 [1] FILM-INSTRUCTION (OPERATOR CONSOLE, LH)  
10. 280-7478 [1] FILM-INSTRUCTION (OPERATOR CONSOLE, RH)  
11. 292-0609 Y [1] ARMREST GP (RH)  
12. 292-0617 Y [1] ARMREST GP (LH)  
13. 297-4147 [1] COVER (LH)  
14. 297-4148 [1] COVER (RH)  
15. 312-1714 [1] FILM-INSTRUCTION (ADJUSTMENT CONTROL)  
16. 114-6658 [20] WASHER (6.5X17X1-MM THK)  
17. 6V-5839 [8] WASHER (11X21X2.5-MM THK)  
18. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
19. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
20. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
21. 9X-2044 M [20] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
23. 116-8376 E SEAL (6-CM EACH)  
23A. 116-8376 E SEAL (17-CM EACH)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 
#SEBP41051025
 

345-1271: SUPPORT GP-CONTROL

345-1271 SUPPORT GP-CONTROL -JOYSTICK, RH
S/N B9K1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
AN ATTACHMENT
i04040268 SEBP4105
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8591 M [10] NUT-CLIP (M6X1-THD)  
2. 8X-1386 [1] SPACER (12.2X23X22-MM THK)  
3. 233-3248 [2] BUSHING  
4. 233-3252 [1] SHAFT AS  
5. 233-3270 [1] SUPPORT AS (RH)  
6. 233-3275 [1] BRACKET AS (RH)  
7. 251-2247 [2] GROMMET  
8. 252-1805 Y [1] CUSHION GP-ARM  
9. 252-1808 [1] SUPPORT AS (RH)  
  3G-0622 [2] RING-RETAINING  
  7X-0605 [2] WASHER-HARD (13X28X1.6-MM THK)  
  9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  294-1001 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
10. 253-3482 [1] KNOB AS (ARMREST ADJUSTMENT)  
11. 253-3483 [1] PLATE AS  
12. 253-3484 [2] WASHER (13X46X3.5-MM THK)  
13. 292-0609 Y [1] ARMREST GP (RH)  
14. 456-1559 [1] ADJUSTER AS  
15. 345-1273 [1] COVER  
16. 345-1274 [1] COVER  
17. 346-0626 [1] BRACKET  
18. 346-9581 [1] FILM-IDENTIFICATION (OPERATOR CONTROLS, RH)  
19. 114-6658 [10] WASHER (6.5X17X1-MM THK)  
20. 5C-9553 M [2] BOLT (M6X1X16-MM)  
21. 7J-5925 [1] PIN-COTTER  
22. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
23. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
24. 8T-4224 [10] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4908 M [7] BOLT (M8X1.25X25-MM)  
26. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
27. 9X-2045 M [10] SCREW-TRUSS HEAD (M6X1X20-MM)  
28. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
29. 8T-6936 D SEAL (0.1-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 
#SEBP41051026
 

345-1272: SUPPORT GP-CONTROL

345-1272 SUPPORT GP-CONTROL -JOYSTICK, LH
S/N B9K1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
AN ATTACHMENT
i04040269 SEBP4105
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8591 M [10] NUT-CLIP (M6X1-THD)  
2. 8X-1386 [1] SPACER (12.2X23X22-MM THK)  
3. 233-3227 [1] SUPPORT AS (LH)  
4. 233-3248 [2] BUSHING  
5. 233-3252 [1] SHAFT AS  
6. 251-2247 [1] GROMMET  
7. 252-1805 Y [1] CUSHION GP-ARM  
8. 252-1807 [1] SUPPORT AS (LH)  
  3G-0622 [2] RING-RETAINING  
  7X-0605 [2] WASHER-HARD (13X28X1.6-MM THK)  
  9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  294-1001 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
9. 253-3482 [1] KNOB AS (ARMREST ADJUSTMENT)  
10. 253-3483 [1] PLATE AS  
11. 253-3484 [2] WASHER (13X46X3.5-MM THK)  
12. 272-8329 [1] BRACKET AS (LH)  
13. 292-0617 Y [1] ARMREST GP (LH)  
14. 456-1559 [1] ADJUSTER AS  
15. 345-1275 [1] COVER  
16. 345-1276 [1] COVER  
17. 346-0627 [1] BRACKET  
18. 346-9580 [1] FILM-IDENTIFICATION (OPERATOR CONTROLS, LH)  
19. 114-6658 [10] WASHER (6.5X17X1-MM THK)  
20. 5C-9553 M [2] BOLT (M6X1X16-MM)  
21. 7J-5925 [1] PIN-COTTER  
22. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
23. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
24. 8T-4224 [10] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4908 M [7] BOLT (M8X1.25X25-MM)  
26. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
27. 9X-2044 M [10] SCREW-TRUSS HEAD (M6X1X16-MM)  
28. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
29. 8T-6936 D SEAL (0.1-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 
#SEBP41051027
 

256-8768: SUSPENSION GP-SEAT

256-8768 SUSPENSION GP-SEAT -AIR
S/N B9K1-UP
24-VOLT
PART OF 238-6683 SEAT GP-SUSPENSION
Type 1
ALSO AN ATTACHMENT
i02164896 SEBP4105
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
4. 8L-8413 [1] STRAP-CABLE (WHITE)  
5. 101-0003 [26] FASTENER  
6. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
7. 164-1234 [1] PLATE  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
9. 186-5107 [2] SCREW-DRIVE (NO 8-16X1.25-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 192-7760 [1] SHAFT  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
  2K-4973 [1] LOCKNUT (3/8-16-THD)  
17. 192-7795 [1] BOOT  
18. 192-7805 [1] HARNESS AS-VALVE (SEAT AIR COMPRESSOR)  
19. 192-7810 [1] SPRING AS-AIR  
  163-1135 [1] SPRING  
  5P-4423 [1] ELBOW  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 192-7822 [1] SHAFT  
23. 237-3943 [1] BRACKET  
24. 237-3970 Y [1] AIR COMPRESSOR GP-SEAT  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 5P-6010 D TUBE (0.26-M)  
29A. 5P-6010 D TUBE (0.36-M)  
30. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
31. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
31A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SEAT)  
    (INCLUDES KNOB ASSEMBLY)
  212-7779 [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER,
    BRACKETS, KIT, CABLE AS & KNOB)
  213-5170 [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  211-9294 [1] KIT-TETHER (SEAT)  
    (INCLUDES TETHER)
  212-7783 H [1] KIT-PULLEY  
    (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING)
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  H   KIT MARKED H SERVICES 212-7779 KIT-SHOCK ABSORBER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 
#SEBP41051028
 

256-8768: SUSPENSION GP-SEAT

256-8768 SUSPENSION GP-SEAT -AIR
S/N B9K1-UP
24-VOLT
PART OF 238-6683, 421-1234 SEAT GP-SUSPENSION
Type 2
ALSO AN ATTACHMENT
i05353971 SEBP4105
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [5] WASHER (10.5X30X3-MM THK)  
2. 4B-4278 [2] WASHER (10.2X20.5X1.6-MM THK)  
3. 4V-8577 [12] BEARING  
5. 101-0003 [26] FASTENER  
6. 145-0326 [1] FILM-INSTRUCTION (SEAT ADJUSTMENT)  
7. 164-1234 [1] PLATE  
8. 169-7380 [1] BOLT-SOCKET HEAD (3/8-16X0.375-IN)  
10. 192-7752 [4] SHAFT AS  
11. 192-7755 [1] HOUSING AS (LOWER)  
12. 314-5274 C [1] SHAFT (INNER)  
13. 192-7767 [1] SCISSORS AS  
14. 192-7783 [1] TOGGLE AS (WIDE)  
15. 192-7787 [1] TOGGLE AS (NARROW)  
16. 192-7790 [1] HOUSING AS (UPPER)  
17. 192-7795 [1] BOOT  
18. 433-5754 [1] HARNESS AS-WIRING (SEAT AIR COMPRESSOR)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  097-7234 [2] TERMINAL-BLADE (18-GA TO 22-GA)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  1P-0810 B TAPE-ELECTRICAL  
  329-3734 B TAPE-ELECTRICAL  
19. 192-7810 [1] SPRING AS-AIR  
  5P-4423 [1] ELBOW  
20. 192-7812 [1] BOLT-SPECIAL  
21. 192-7820 [3] BUMPER  
22. 314-5275 C [1] SHAFT (OUTER)  
25. 108-4311 [1] SCREW-MACHINE (3/8-16X0.75-IN)  
26. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
27. 3J-4818 [1] LOCKWASHER  
28. 5C-2890 M [3] NUT (M6X1-THD)  
29. 5P-6010 D TUBE (0.257-M)  
29A. 5P-6010 D TUBE (0.356-M)  
30. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
31. 211-5358 E CONDUIT-FLEXIBLE (26.7-CM)  
31A. 211-5358 E CONDUIT-FLEXIBLE (35.6-CM)  
34. 442-8151 [1] CLIP-CABLE  
35. 3S-2093 [4] STRAP-CABLE  
   
    AVAILABLE REPAIR KIT(S):
  192-7799 [1] KIT-AIR VALVE & SWITCH (SEAT)  
    (INCLUDES KNOB ASSEMBLY)
  212-7779 H [1] KIT-SHOCK ABSORBER (SUSPENSION SEAT)  
    (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER,
    BRACKETS, KIT, CABLE ASSEMBLY & KNOB)
  211-9294 [1] KIT-TETHER (SEAT)  
    (INCLUDES TETHER)
  213-5170 [1] KIT-SEAT ADJUSTER (SEAT ADJUSTMENT)  
    (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING)
  212-7783 H [1] KIT-PULLEY  
    (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING)
  397-6405 [1] KIT-SEAT AIR COMPRESSOR  
    (INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET-MOUNT & HARNESS ASSEMBLIES)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  H   KITS MARKED H SERVICE PART(S) MARKED H
  M   METRIC PART
 
#SEBP41051029
 

266-7013: TRIM GP-CAB

266-7013 TRIM GP-CAB
S/N B9K1-341
PART OF 266-7000, 383-0814 CAB AR
ALSO AN ATTACHMENT
i02762398 SEBP4105
  For full view, you need register

Parts for your 24M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-3265 [24] RIVET  
2. 6G-2395 [2] DOOR GP (AIR VENTED)  
    (EACH INCLUDES)
  6G-7222 [2] ROLLER  
3. 6G-2396 [2] GASKET  
4. 139-6039 [1] NUT-RETAINER (U-TYPE)  
5. 278-1094 [1] COVER  
6. 278-1096 [1] COVER  
7. 283-7962 [1] FLOOR MAT  
8. 297-4160 [1] COVER AS-PANEL (SWITCH)  
  297-4161 [1] FILM-IDENTIFICATION (LOWER)  
  297-4162 [1] FILM-IDENTIFICATION (SWITCH PANEL, UPPER)  
9. 114-6658 [19] WASHER (6.5X17X1-MM THK)  
10. 7G-4824 [1] STRAP  
11. 8E-7791 [1] STRAP  
12. 9X-2044 M [18] SCREW-TRUSS HEAD (M6X1X16-MM)  
13. 9X-2045 M [1] SCREW-TRUSS HEAD (M6X1X20-MM)  
  M   METRIC PART

Information:

Caterpillar Parts SIS Catalog 24M :

Truck sale:

USD $81,263 
2007 CAT 24M

Pfeifer Heavy Machinery B.V.
Groenlo, Gelderland, The Netherlands
USD $87,414 
2008 CAT 24M

Pfeifer Heavy Machinery B.V.
Groenlo, Gelderland, The Netherlands
$835,326 USD 
CATERPILLAR 24M 2011
- MOTOR GRADERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.