AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

559-5504 THUMB GP -PIN ON, 6-TOOTH S/N THC1-UP FULL ROTATION FOR USE WITH 1372-MM (54-IN) BUCKET HYDRAULIC


WORK TOOLS
THUMB GP

THUMB HYDRAULIC THUMB THC
 Hydraulic Thumbs THC00001-UP (MACHINE) SEBP6230 HYDRAULIC THC   (2012)

WORK TOOLS

THUMB GP
THUMB GP
559-5501 THUMB GP
THUMB GP
559-5502 THUMB GP
THUMB GP
559-5504 THUMB GP
THUMB GP
559-5505 THUMB GP
THUMB GP
559-5506 THUMB GP
THUMB GP
559-5507 THUMB GP
 

#SEBP62300340
 

559-5504: THUMB GP

559-5504 THUMB GP -PIN ON, 6-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1372-MM (54-IN) BUCKET
i07488599 SEBP6230
5595504 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 263-9600 [6] SPACER  
5. 384-3908 [1] LINK AS (CENTER)  
5A. 7Y-5131 [4] BUSHING  
6. 384-4034 [1] TUBE-RETAINER  
7. 418-0447 [1] THUMB AS  
7A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
7B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
8. 093-0349 [1] WASHER (22X60X6-MM THK)  
9. 222-7101 [2] WASHER (71X130X3-MM THK)  
10. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
11. 8T-5878 M [2] BOLT (M24X3X80-MM)  
12. 332-4695 M [4] NUT (M8X1.25-THD)  
13. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
13A. 157-4552 [1] BEARING  
14. 384-3910 [2] PLATE AS-STOP  
15. 384-3913 [2] PLATE-CAP  
16. 384-3914 [1] PIN  
17. 394-1764 [1] PIN  
18. 394-1765 [1] PIN AS  
19. 417-0226 Y [1] CYLINDER GP-THUMB  
20. 517-2510 [1] SPACER (72X130X18-MM THK)  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300341
 

559-5505: THUMB GP

559-5505 THUMB GP -PIN ON, 3-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i07488620 SEBP6230
5595505 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
7A. 157-4552 [1] BEARING  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 394-1764 [1] PIN  
13. 394-1765 [1] PIN AS  
14. 418-0449 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
15. 517-2510 [1] SPACER (72X130X18-MM THK)  
16. 093-0349 [1] WASHER (22X60X6-MM THK)  
17. 8T-5878 M [2] BOLT (M24X3X80-MM)  
18. 332-4695 M [4] NUT (M8X1.25-THD)  
19. 384-3910 [2] PLATE AS-STOP  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300342
 

559-5506: THUMB GP

559-5506 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i07488711 SEBP6230
5595506 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
7A. 157-4552 [1] BEARING  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 394-1764 [1] PIN  
13. 394-1765 [1] PIN AS  
14. 418-0451 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
15. 517-2510 [1] SPACER (72X130X18-MM THK)  
16. 093-0349 [1] WASHER (22X60X6-MM THK)  
17. 8T-5878 M [2] BOLT (M24X3X80-MM)  
18. 332-4695 M [4] NUT (M8X1.25-THD)  
19. 384-3910 [2] PLATE AS-STOP  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300343
 

559-5507: THUMB GP

559-5507 THUMB GP -PIN ON, 5-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1372-MM (54-IN) BUCKET
i07488729 SEBP6230
5595507 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 8T-5878 M [2] BOLT (M24X3X80-MM)  
7. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
7A. 157-4552 [1] BEARING  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 394-1764 [1] PIN  
13. 394-1765 [1] PIN AS  
14. 418-0453 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
15. 517-2510 [1] SPACER (72X130X18-MM THK)  
16. 093-0349 [1] WASHER (22X60X6-MM THK)  
17. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
18. 332-4695 M [4] NUT (M8X1.25-THD)  
19. 384-3910 [2] PLATE AS-STOP  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300344
 

559-5508: THUMB GP

559-5508 THUMB GP -PIN ON, 6-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1524-MM (60-IN) BUCKET
i07488737 SEBP6230
5595508 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
7A. 157-4552 [1] BEARING  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 394-1764 [1] PIN  
13. 394-1765 [1] PIN AS  
14. 418-0455 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
15. 517-2510 [1] SPACER (72X130X18-MM THK)  
16. 093-0349 [1] WASHER (22X60X6-MM THK)  
17. 8T-5878 M [2] BOLT (M24X3X80-MM)  
18. 332-4695 M [4] NUT (M8X1.25-THD)  
19. 384-3910 [2] PLATE AS-STOP  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300345
 

559-5509: THUMB GP

559-5509 THUMB GP -PIN ON, 6-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1676-MM (66-IN) BUCKET
i07489094 SEBP6230
5595509 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 263-9600 [6] SPACER  
5. 384-3908 [1] LINK AS (CENTER)  
5A. 7Y-5131 [4] BUSHING  
6. 384-4034 [1] TUBE-RETAINER  
7. 418-0457 [1] THUMB AS  
7A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
7B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
8. 093-0349 [1] WASHER (22X60X6-MM THK)  
9. 222-7101 [2] WASHER (71X130X3-MM THK)  
10. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
11. 8T-5878 M [2] BOLT (M24X3X80-MM)  
12. 332-4695 M [4] NUT (M8X1.25-THD)  
13. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
13A. 157-4552 [1] BEARING  
14. 384-3910 [2] PLATE AS-STOP  
15. 384-3913 [2] PLATE-CAP  
16. 384-3914 [1] PIN  
17. 394-1764 [1] PIN  
18. 394-1765 [1] PIN AS  
19. 417-0226 Y [1] CYLINDER GP-THUMB  
20. 517-2510 [1] SPACER (72X130X18-MM THK)  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300346
 

559-5510: THUMB GP

559-5510 THUMB GP -PIN ON, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1219-MM (48-IN) BUCKET
i07489107 SEBP6230
5595510 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
6A. 157-4552 [1] BEARING  
7. 384-3908 [1] LINK AS (CENTER)  
7A. 7Y-5131 [4] BUSHING  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 421-7321 [1] THUMB AS  
13A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
13B. 147-5838 [2] BUSHING  
14. 517-2510 [1] SPACER (72X130X18-MM THK)  
15. 093-0349 [1] WASHER (22X60X6-MM THK)  
16. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
17. 332-4695 M [4] NUT (M8X1.25-THD)  
18. 384-3910 [2] PLATE AS-STOP  
19. 417-0226 Y [1] CYLINDER GP-THUMB  
20. 559-5265 [1] LINK AS  
21. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
21A. 157-4552 [1] BEARING  
22. 559-5285 [2] PIN AS  
23. 559-5288 [1] PIN AS  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300347
 

559-5511: THUMB GP

559-5511 THUMB GP -PIN ON, 5-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1372-MM (54-IN) BUCKET
i07489124 SEBP6230
5595511 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 384-3906 [1] LINK AS-IDLER (RH)  
6A. 157-4552 [1] BEARING  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
7. 384-3908 [1] LINK AS (CENTER)  
7A. 7Y-5131 [4] BUSHING  
8. 384-3913 [2] PLATE-CAP  
9. 384-3914 [1] PIN  
10. 384-4034 [1] TUBE-RETAINER  
11. 394-1764 [1] PIN  
12. 394-1765 [1] PIN AS  
13. 451-2525 [1] THUMB AS  
13A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
13B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
14. 517-2510 [1] SPACER (72X130X18-MM THK)  
15. 093-0349 [1] WASHER (22X60X6-MM THK)  
16. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
17. 332-4695 M [4] NUT (M8X1.25-THD)  
18. 384-3910 [2] PLATE AS-STOP  
19. 417-0226 Y [1] CYLINDER GP-THUMB  
20. 559-5265 [1] LINK AS  
21. 559-5275 [1] LINK AS-IDLER  
21A. 157-4552 [1] BEARING  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22. 559-5285 [2] PIN AS  
23. 559-5288 [1] PIN AS  
24. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 6Y-2266 [2] PIN  
27. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
28. 8T-4173 M [1] BOLT (M16X2X110-MM)  
29. 8T-4174 M [1] BOLT (M16X2X120-MM)  
30. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
31. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [2] BOLT (M24X3X80-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300348
 

559-5512: THUMB GP

559-5512 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 914-MM (36-IN) BUCKET
i07489757 SEBP6230
5595512 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 263-9600 [6] SPACER  
5. 384-3908 [1] LINK AS (CENTER)  
5A. 7Y-5131 [4] BUSHING  
6. 384-4034 [1] TUBE-RETAINER  
7. 417-0226 Y [1] CYLINDER GP-THUMB  
8. 418-0459 [1] THUMB AS  
8A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
8B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
9. 093-0349 [1] WASHER (22X60X6-MM THK)  
10. 222-7101 [2] WASHER (71X130X3-MM THK)  
11. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
12. 8T-5878 M [2] BOLT (M24X3X80-MM)  
13. 332-4695 M [4] NUT (M8X1.25-THD)  
14. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
14A. 157-4552 [1] BEARING  
15. 384-3910 [2] PLATE AS-STOP  
16. 384-3913 [2] PLATE-CAP  
17. 384-3914 [1] PIN  
18. 394-1764 [1] PIN  
19. 394-1765 [1] PIN AS  
20. 517-2510 [1] SPACER (72X130X18-MM THK)  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP62300349
 

559-5514: THUMB GP

559-5514 THUMB GP -PIN GRABBER, 4-TOOTH
S/N THC1-UP
FULL ROTATION
FOR USE WITH 1067-MM (42-IN) BUCKET
i07489817 SEBP6230
5595514 THUMB GP Parts scheme
  For full view, you need register

Parts for your HYDRAULIC THUMB:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [9] FITTING-GREASE (1/8-27 PTF)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 159-8036 [1] FILM-WARNING (READ OMM)  
4. 222-7101 [2] WASHER (71X130X3-MM THK)  
5. 263-9600 [6] SPACER  
6. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
7. 384-3906 [1] LINK AS-IDLER (RH)  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
7A. 157-4552 [1] BEARING  
8. 384-3908 [1] LINK AS (CENTER)  
8A. 7Y-5131 [4] BUSHING  
9. 384-3913 [2] PLATE-CAP  
10. 384-3914 [1] PIN  
11. 384-4034 [1] TUBE-RETAINER  
12. 394-1764 [1] PIN  
13. 394-1765 [1] PIN AS  
14. 418-0461 [1] THUMB AS  
14A. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
14B. 147-5838 [2] BUSHING  
  384-3956 [2] CAP-RETAINER  
15. 517-2510 [1] SPACER (72X130X18-MM THK)  
16. 093-0349 [1] WASHER (22X60X6-MM THK)  
17. 8T-5878 M [2] BOLT (M24X3X80-MM)  
18. 332-4695 M [4] NUT (M8X1.25-THD)  
19. 384-3910 [2] PLATE AS-STOP  
20. 417-0226 Y [1] CYLINDER GP-THUMB  
21. 559-5265 [1] LINK AS  
22. 559-5275 [1] LINK AS-IDLER  
  8Y-7023 M [1] BOSS (M12X1.75-MM)  
22A. 157-4552 [1] BEARING  
23. 559-5285 [2] PIN AS  
24. 559-5288 [1] PIN AS  
25. 5P-8249 [2] WASHER-HARD (24X41.5X4-MM THK)  
26. 6V-7676 M [2] NUT (M24X3-THD)  
27. 6Y-2266 [2] PIN  
28. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
29. 8T-4173 M [1] BOLT (M16X2X110-MM)  
30. 8T-4174 M [1] BOLT (M16X2X120-MM)  
31. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
32. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
33. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
   
  268-4530 F [1] FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Thumb - Lubricate
Hydraulic Thumbs
Stop - Inspect/Replace
Hydraulic Thumbs
Special Instruction
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the <NOBR>418-0310</NOBR> Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0310 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators {5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the 418-0311 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Procedure to Install the Connecting Lines Gp on Certain Hydraulic Excavators{5057, 5362, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4551 Plate and Spacer Installation Gp {6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Location of The 456-4554 Plate and Spacer Installation Gp {6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}
Installation Procedure for the 463-9598 Bracket Mounting Gp on Certain Excavators{0679, 6502, 6547}

Caterpillar Parts SIS Catalog HYDRAULIC :

THUMB GP
559-5502 THUMB GP
THUMB GP
559-5501 THUMB GP
THUMB GP
559-5500 THUMB GP
THUMB GP
544-0488 THUMB GP
THUMB GP
536-8786 THUMB GP
THUMB GP
533-0918 THUMB GP
THUMB GP
533-0917 THUMB GP
THUMB GP
533-0916 THUMB GP
THUMB GP
559-5505 THUMB GP
THUMB GP
559-5506 THUMB GP
THUMB GP
559-5507 THUMB GP
THUMB GP
559-5508 THUMB GP
THUMB GP
559-5509 THUMB GP
THUMB GP
559-5510 THUMB GP
THUMB GP
559-5511 THUMB GP
THUMB GP
559-5512 THUMB GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.