parts catalog

SET SCREW 2H9128 - Caterpillar

2H9128 SET SCREW Caterpillar parts D337 SET
Alternative (cross code) number:
Caterpillar 2H9128 SET SCREW

Buy SET SCREW 2H9128 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 2H9128:

MARINE ENGINE  D337   Caterpillar
Number on catalog scheme: None
  For full view, you need register


(2) Torque for nut ... 45 N m (33.2 5 lb ft)(3) Torque for nut ... 25 7 N m (18 5 lb ft)(7) Torque for nut ... 12 4 N m (8.9 3 lb ft)(10) Bearings (two places). When replacement is necessary, use a driver only on the end that is stamped.Adjustment Procedure:
1. Turn adjustment screw (1) counterclockwise until the screw is even (flush) with the bottom of the pedal.2. Adjust setscrew (4) until Dimension (A) equals 160 5 mm (6.30 .20 in). Lock setscrew (4) with locknut (3).3. Install a S1617 Bolt (8) through lever (9) into tapped hole valve housing. This will center the valve spool in the maximum speed position.4. Adjust rod (5) until Dimension B equals 40 3 mm (1.57 .12 in).5. Adjust end (6) on rod (5) until the pin will fit freely through end (6) and lever (9). Tighten locknut (7).6. Remove the S1617 Bolt (8) from valve spool lever (9).7. Push down on the pedal until lever (9) makes contact with the stop on the brake valve housing.8. Hold the pedal in this position and turn adjustment screw (1) clockwise until it makes contact with the pedal support housing.9. Turn the adjustment screw 1/4 additional turn and lock in place with locknut (2).

Caterpillar parts catalog:

Caterpillar parts catalog
D337 MARINE ENGINE 23B00300-00455

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.