parts catalog

SHAFT 0005582 - Caterpillar

0005582 SHAFT Caterpillar parts SHAFT
Alternative (cross code) number:
Caterpillar 0005582 SHAFT
Weight: 170 pounds 77 kg.

Buy SHAFT 0005582 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


The pump control valve (steering) on the pump can be tested with one of the pump discharge tests. The high pressure stall test indicates the needs for adjustment of the pressure cutoff spool. The margin pressure test indicates the needs for adjustment of the margin spool.Required Tools
Illustration 1 g01174613
Tooling (A)
Table 1
Required Tools    
Part Number    Description    Quantity    
1U-5796     Pressure Differential Gauge (Group)     1    
Table 2
Tools Needed from the 1U-5796 Pressure Differential Tool Gp    
Tooling    Item    Part Number    Description    Qty    
A     A1     177-7861     Hose As     1    
A2 6V-4143     Quick Connect Coupler     4    
A3 6V-3965     Fitting As     3    
A4 6V-4144     Quick Connect Coupler     1    
A5 8T-0861     Pressure Gauge
60000 kPa (8600 psi)     1    
A6 8C-8431     Tee     1    
A7 1U-5793     Pressure Differential Gauge Group     1    
A8 6V-0484     O-Ring Adapter     1    
A9 177-7861     Hose As     1    Adjustment Procedure (Pressure Cutoff Spool)
Reference: Refer to "High Pressure Stall Test" in Testing and Adjusting, "Pump Discharge Pressure - Test" in this module.
Illustration 2 g01174909
(5) Pressure Cutoff Spool (8) Margin Spool
Illustration 3 g00866789
Pressure cutoff spool in the pump control valve (steering) (3) Adjustment screw (4) Spring (5) Pressure cutoff spool (6) Cover (7) LocknutWhen a high pressure stall test indicates a need for adjustment of the pressure cutoff spool, follow this procedure:
Lower the implements to the ground.
Stop the engine. Move the implement control levers and move the steering control lever to all positions in order to release the pressure from the hydraulic system.
Hold adjustment screw (3) with a 6 mm combination wrench and loosen locknut (7) with a 13 mm combination wrench. Turn adjustment screw (3) counterclockwise in order to

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.