parts catalog

SHAFT 1C4136 - Caterpillar

1C4136 SHAFT Caterpillar parts SHAFT
Alternative (cross code) number:
Caterpillar 1C4136 SHAFT
Weight: 109 pounds 49 kg.

Buy SHAFT 1C4136 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Start By:a. remove cylinder head assembly 1. Use Tool (A) to compress springs (1).2. Remove the locks.3. Remove Tool (A), the valve, the rotocoil, and the spring. If a valve can be used again, put identification on the valve for location at installation. 4. Use Tool (B) to check spring force. The specifications for the spring are given in Specifications Manual.5. Do Steps 1 through 4 again for the remainder of the valves.Install Valves 1105-012
1. Put clean engine oil on the valve stem. Install washer (3), spring (2), rotocoil (1) and the valve. 2. Use Tool (A) to compress the spring.3. Install locks (4) with the thick end up.
Locks can be thrown from valve when compressor is released, if they are not in their correct position on the valve stem.
4. Remove the compressor and hit the valve with a soft faced hammer to be sure locks are in their correct position on the valve. 5. Do Steps 1 through 4 again for the remainder of the valves.End By:a. install cylinder head assembly

Parts shaft Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.