AVSPARE.COM
parts catalog

SHAFT GP-DRIVE 3967839 - Caterpillar



3967839 SHAFT GP-DRIVE Caterpillar parts 902C, 903C SHAFT
Rating:
43
Alternative (cross code) number:
CA3967839
396-7839
3967839
Caterpillar 3967839 SHAFT GP-DRIVE

Buy SHAFT GP-DRIVE 3967839 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT WHEEL LOADER,

Compatible equipment models: 3967839:

COMPACT WHEEL LOADER  902C   903C   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

Power Test Prodecure
Install tooling (A). Use Cat ET in order to perform the machine power output test.
Open the software program (ET) and check for active diagnostic codes. If there is an active diagnostic code, the diagnostic procedure will be stopped until the condition that caused the diagnostic code is corrected.
Illustration 2 g03386350
Select "Machine Power Test".
Illustration 3 g03386309
Click "Accept" to continue.
Make sure that there are no active diagnostics.
Warm hydraulic oil temperature to between 40° C (104° F) and 60° C (140° F).
Engage the implement lockout switch.
Move the direction switch to the neutral position.
Set the parking brake.
Completely depress the brake pedal.
Fully depress and hold the governor pedal.
Illustration 4 g03386251
Select "Next". Refer to Illustration 4.
Illustration 5 g03386264
Move the direction lever to the FORWARD position.
Illustration 6 g03386257
Fully release the governor pedal.
Illustration 7 g03386270
Move the direction lever to the NEUTRAL position.
Illustration 8 g03386273
Illustration 9 g03386279
Fully release the brake pedal.
Illustration 10 g03386285
Click "Next". Verify the displayed results with the service manual.
Illustration 11 g03386294
The test may result in:
Successful
Low stall speed: which may be a result of engine performance is not correct, engine oil is cold, or hystat pump COR is not set correctly.
High stall speed in both directions: which may be a result of engine oil level, air in the oil, clutches slipping in the transmission, or mechanical issues with hystat pump.
High stall speed in one direction: which may be a result of a leak in the system.Power Test Troubleshooting
Problem 1
Low stall speedProbable Causes
Engine performance is not correct.
The engine oil is cold.
Hystat pump COR is not set correctly – Run COR check to see.Problem 2
High stall speed in both directionsProbable Causes
The engine oil level is low.
There is air in the oil.
Clutches are slipping in the transmission.
There is a mechanical problem in the hystat pump.Problem 3
High stall speed in one directionProbable Causes
There is a leak in the hystat circuit.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
902C Compact Wheel Loader W5T00001-UP (MACHINE) POWERED BY C2.4 Engine
903C Compact Wheel Loader W6T00001-UP (MACHINE) POWERED BY C2.4 Engine
903C Compact Wheel Loader MW400001-UP (MACHINE) POWERED BY C2.4 Engine
902C2 Compact Wheel Loader YKT00001-UP (MACHINE) POWERED BY C2.4 Engine
903C2 Compact Wheel Loader MW800001-UP (MACHINE) POWERED BY C2.4 Engine


Parts shaft Caterpillar catalog:

1366881 SHAFT GP-DRIVE
PF-290B, PS-360B, PS-360C
2914414 SHAFT GP-STUB
G3512B, G3516B, G3520B
2134224 SHAFT GP-AXLE
TH103, TH460B, TH560B, TH580B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.