parts catalog

SHAFT AS-IDL 5088211 - Caterpillar

5088211 SHAFT AS-IDL Caterpillar parts SHAFT
Alternative (cross code) number:
Caterpillar 5088211 SHAFT AS-IDL

Buy SHAFT AS-IDL 5088211 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Table 1
Lubricant Viscosities for Ambient Temperatures
Compartment or System Oil Type and Classification Oil Viscosities °C °F
Min Max Min Max
Engine Crankcase for all Machines(1)(2)
Drive Chain Boxes Cat DEO Multigrade
Cat "DEO" "SYN"
Cat Arctic "SYN"(3)
Cat "ECF-1"(4)
API CG-4 Multigrade(5) SAE 0W-20 −40 10 −40 50
SAE 0W-30 −40 30 −40 86
SAE 0W-40 −40 40 −40 104
SAE 5W-30 −30 30 −22 86
SAE 5W-40 −30 50 −22 122
SAE 10W-30(6) −18 40 0 104
SAE 10W-40 −18 50 0 122
SAE 15W-40 −9.5 50 15 122
(1) Supplemental heat is recommended for cold soaked starts below the minimum ambient temperature. Supplemental heat may be required for cold soaked starts that are above the minimum temperature that is stated, depending on the parasitic load and other factors. Cold soaked starts occur when the engine has not been operated for a period of time. The delay allows the oil to become more viscous due to cooler ambient temperatures.
(2) API CF oils are not recommended for Caterpillar 3500 Series and smaller Direct Injection (DI) diesel engines. API CF-4 oils are not recommended for Caterpillar diesel engines.
(3) Cat Arctic DEO SYN is an SAE 0W-30 viscosity grade oil.
(4) API CI-4, API CI-4 PLUS, and API CH-4 oils are acceptable if the requirements of Caterpillar's ECF-1 (Engine Crankcase Fluid specification - 1) are met. API CI-4, API CI-4 PLUS, and API CH-4 oils that have not met the requirements of Caterpillar's ECF-1 specification may cause reduced engine life.
(5) API CG-4 oils are acceptable for use in all Caterpillar machine diesel engines. When API CG-4 oils are used, the oil change interval should not exceed 250 hours. API CG-4 oils that also meet API CI-4, API CI-4 PLUS, or API CH-4 must also meet the requirements of the Caterpillar ECF-1 specification.
(6) SAE 10W-30 is the preferred viscosity grade for the 3116, 3126, C7, C-9 and the C9 diesel engines when the ambient temperature is between -18° C (0° F) and 40° C (104° F).

Parts shaft Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.