parts catalog

SHAFT, OUTPUT 775058 - Caterpillar

775058 SHAFT, OUTPUT Caterpillar parts CB-614 SHAFT
Alternative (cross code) number:
Caterpillar 775058 SHAFT, OUTPUT

Buy SHAFT, OUTPUT 775058 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 775058:

Number on catalog scheme: 42
  For full view, you need register


Table 1
Required Tools    
Part Number     Description     Quantity    
8T-5096     Dial Indicator Gp     1    Use this procedure in order to check for proper clutch assembly. Refer to Specifications, "Power Train" for running clearances for the clutch packs.
Illustration 1 g00904507
(1) Bearing (2) Disc (3) Gear assembly (4) Washer (5) Gear assembly (6) Disc (7) Rotor (8) Bearing (9) Carrier
Remove the following components from the clutch group:
Bearing (1)
Disc (2)
Gear assembly (3)
Washer (4)
Disc (5)
Gear assembly (6)
Rotor (7)
Bearing (8)
Carrier (9) Note: Do not use a puller to remove rotor (7) from the clutch assembly.
Illustration 2 g00904508
(10) Hub assembly (11) Ring (12) Clutch pack (13) Piston (14) Passage
Position the assembled clutch group with the shaft in the vertical position. Position the hub assembly of the clutch that is being measured so that the hub assembly faces upward.
Make sure that piston (13) moves freely.
Position the tip of a dial indicator on the flat of piston (13) at location (B). Zero the indicator.Note: Ensure that the tip of the indicator is parallel with the centerline of the shaft assembly.
Personal injury can result from applying air pressure without the lock ring securely in place. Make sure the lock ring (11) is securely in place before applying air pressure to the clutch pack.
To check the running clearance for the clutch packs, apply approximately 140 kPa (20 psi) air pressure to passage (14) for clutch pack (12) .
Piston (13) and clutch pack (12) should move up. Determine the amount of piston movement from the reading on the dial indicator. This is the running clearance for the clutch pack.Repeat Step 1 through Step 6 in order to determine the running clearances for the remaining clutch packs.

Caterpillar parts catalog:

Caterpillar parts catalog

Parts shaft Caterpillar catalog:

F170385 SHAFT
CB-514, CB-614
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.