AVSPARE.COM
parts catalog

SHELL AS 3599461 - Caterpillar



3599461 SHELL AS Caterpillar parts G325B, VRG-40/2 SHELL
Rating:
55
Alternative (cross code) number:
CA3599461
359-9461
3599461
Caterpillar 3599461 SHELL AS

Buy SHELL AS 3599461 Caterpillar genuine, new aftermarket tractor parts with delivery
GRAPPLE-DEM/SORT,

Compatible equipment models: 3599461:

GRAPPLE-DEM/SORT  G325B   VRG-40/2   Caterpillar
Number on catalog scheme: 2
 
  For full view, you need register

Information:

open is a failure of an electrical circuit that results in no flow of electrical current. An open circuit is usually caused by failed electrical wires or a poor connection of electrical connectors. If an electrical wire or a connection is broken, the flow of electrical current through the circuit is interrupted. A normally closed circuit will have less than 5 ohms of resistance. The following procedure explains the test for an open circuit:ReferenceFor a complete electrical schematic, refer to the Electrical System Schematic for the machine that is being serviced.TEST FOR AN OPEN CIRCUIT.
Identify the connectors and the wire numbers of the suspect circuits. Use the Electrical System Schematic of the machine to identify the circuits.
Turn the key start switch and the disconnect switch to the OFF position.
Disconnect the components from the wiring harness.
At one of the disconnected harness connections, place a jumper wire from the contact of the suspect wire to frame ground.
At the other connector of the machine harness, use the multimeter probes to measure the resistance from the contact of the suspect wire to frame ground.Expected Result: The resistance is less than 5 ohms. OK - The resistance is less than 5 ohms. The harness circuit is correct.Stop. NOT OK - The resistance is greater than 5 ohms. There is an open in the machine harness.Repair: Repair the machine harness or replace the machine harness.Stop.

Caterpillar parts catalog:

Caterpillar parts catalog
G310B, G315B, G320B & G325B Demolition & Sorting Grapples CZG00001-UP (MACHINE)
VRG-20/2, VRG-25/2, VRG-30/2 & VRG-40/2 Demolition & Sorting Grapples FEC00001-UP (MACHINE)


Parts shell Caterpillar catalog:

3543987 SHELL AS
G325B, VRG-40/2
3716775 SHELL AS
G325B, VRG-40/2
3716776 SHELL AS
G325B, VRG-40/2
3599460 SHELL AS
G325B, VRG-40/2
3716773 SHELL AS
G325B, VRG-40/2
3716774 SHELL AS
G325B, VRG-40/2
3674188 SHELL AS
G325B, VRG-40/2
3674189 SHELL AS
G325B, VRG-40/2
3716765 SHELL AS
G325B, VRG-40/2
3716772 SHELL AS
G325B, VRG-40/2
3543989 SHELL AS
G325B, VRG-40/2
3543990 SHELL AS
G325B, VRG-40/2
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.