7B0296 SHELL A. Caterpillar parts SHELL
Alternative (cross code) number:
Illustration 1 g01507674
Fill the autolube reservoir through remote fill port (1).
Illustration 2 g01211915
The autolube reservoir and the autolube pump are located between the frame rails above the transmission.
(2) Level indicator
(3) Vent port
(4) Inlet for the remote grease line
Fill the reservoir until grease appears at the outlet for vent port (3). Note: Level indicator (2) can also be used in order to determine when the reservoir is full.Note: The bulk capacity of the grease reservoir is 27 kg (60 lb).Note: If the reservoir is not properly vented, pressure will cause the wiper seal on the follower assembly inside the reservoir to fail when the reservoir is filled. Grease on the top side of the follower assembly may prevent the autolube system from functioning properly. Also, grease on the top side of the follower assembly may cause damage to the autolube system.The automatic lubrication reservoir provides lubrication for many components. There are fittings at the following locations: rear of machine, left side of machine and right side of machine.If any of the remote lines become damaged, install a fitting in place of the remote line. Lubricate the item at the fittings until the remote line can be replaced.For more information on the autolube system, refer to Specifications, Systems Operation, Testing and Adjusting, RENR8396, "777F Off-Highway Truck Automatic Lubrication System".