AVSPARE.COM
parts catalog

SHIM, GROUP 777457 - Caterpillar



777457 SHIM, GROUP Caterpillar parts CB-614 SHIM
Rating:
71
Alternative (cross code) number:
CA777457
77-7457
777457
Caterpillar 777457 SHIM, GROUP

Buy SHIM, GROUP 777457 Caterpillar genuine, new aftermarket tractor parts with delivery
VIBRATORY COMPACTOR,

Compatible equipment models: 777457:

VIBRATORY COMPACTOR  CB-614   Caterpillar
Number on catalog scheme: 31
 
  For full view, you need register

Information:


Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     8S-7640     Stand     1    
8S-7611 Tube     1    
8S-7615 Pin     1    
B     1U-9745     Air/Hydraulic Jack Gp     1    
Illustration 1 g00588115
Use Tooling (B) (not shown) in order to raise the machine. Install Tooling (A) below the main frame.
As required, install cribbing under the tandems. The cribbing must prevent the tandems from oscillating in order to prevent the wheels from contacting the ground. The wheels must be prevented from contacting the ground during this procedure.
Illustration 2 g00287631
Side View (1) Clutch pedal (2) Splined shaft (3) Stop screw (4) Floorplate (5) Rod end (two) (A) 95 6 mm (3.7 0.2 inch) (B) 447 3 mm (17.6 0.1 inch)
Adjust rod ends (5) to dimension (B) .
Position pedal (1) on splined shaft (2) to dimension (A) .
Completely turn in stop screw (3) .
Start the engine.
Depress pedal (1). Put the transmission control lever in FIRST speed.
Release pedal (1). Slowly depress pedal (1) until the wheels stop turning. Adjust stop screw (3) until the stop screw contacts pedal (1) .
Put the transmission control lever in PARK position. Release pedal (1). Turn the stop screw (3) in one turn. Tighten the locknut.
Push down on pedal (1). Put the transmission control lever in each forward and each reverse speed. If the wheels begin to move in any speed, loosen the locknut and turn stop screw (3) in one additional turn.
Stop the engine.
Raise the machine in order to remove Tooling (A) .
Lower the machine.

Caterpillar parts catalog:

Caterpillar parts catalog
CB-614 VIBRATORY COMPACTOR 7CD00001-00115 (MACHINE)


Parts shim Caterpillar catalog:

0774578 SHIM
CB-614, CS-551, RR-250, SS-250
0773544 SHIM
CB-614, CS-551, SS-250
1207142 SHIM
CB-414, CB-514, CB-614
62000041 SHIM
CB-514, CB-614
62000012 SHIM
CB-514, CB-614
B141407 SHIM
PS-110, PS-130, PS-180
E820041 SHIM, .020"
PS-110, PS-130, PS-180
E820040 SHIM, .007"
PS-110, PS-130, PS-180
E820039 SHIM, .005"
PS-110, PS-130, PS-180
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.