parts catalog

SHIM 7B0268 - Caterpillar

7B0268 SHIM Caterpillar parts SHIM
Alternative (cross code) number:
Caterpillar 7B0268 SHIM
Weight: 0.03 pounds 0 kg.

Buy SHIM 7B0268 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Installation of the High Pressure Oil Line
Illustration 1 g01221721
Thread connector assembly (1) by hand before additional tightening.
Torque the connector assembly (1) to 48 5 N m (35 4 lb ft).
Align the two nuts on tube assembly (2) to the fuel pump (4) and the connector assembly (1). Note: Use a wrench on the connector assembly and a wrench on the nut in order to tighten the nut.
Torque the two nuts on tube assembly (2) to 40 4 N m (30 3 lb ft).
Hold the elbow assembly on the fuel pump in position with a second wrench. Torque the jam nut to 24 2 N m (18 1 lb ft). Installation of the Low Pressure Oil Line
Illustration 2 g01221723
Install the port connection into the low pressure port of the unit injector hydraulic pump.
Tighten the tube connection (5) to the port connector.
Tighten the base of the tube assembly (6) onto the engine block.
Torque the fittings to the standard torque.

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.