parts catalog

SHIM 9W0287 - Caterpillar

9W0287 SHIM Caterpillar parts SHIM
Alternative (cross code) number:
Caterpillar 9W0287 SHIM
Weight: 11 pounds 5 kg.

Buy SHIM 9W0287 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


1. Remove belt tightener (7) from the fan drive. See the topic, Remove Belt Tightener.2. Disconnect lubrication line (3), if equipped.3. Disconnect rod end (2) from lever assembly (5).4. Remove two bolts (4), and move bracket assembly (1) away from the fan drive.5. Fasten a hoist to fan drive (6). Remove the bolts that hold the fan drive to the front drive housing. Remove the fan drive. The weight of the fan drive is 87 kg (192 lb). The following steps are for installation of the fan drive.6. Fasten a hoist to fan drive (6). Put the fan drive in position on the front drive housing. Install the bolts that hold it.7. Put bracket assembly (1) in position on the fan drive, and install two bolts (4).8. Connect rod end (2) to lever assembly (5).9. Connect lubrication line (3) to the fan drive.10. Install belt tightener (7). See the topic, Install Belt Tightener.End By:a. install fan and fan guardDisassemble And Assemble Fan Drive
Start By:a. remove fan drive 1. Remove the bolts and adapter (2) from the fan drive. Remove O-ring seal (1) from the adapter.2. Fasten a hoist to pulley (7). Remove the bolts, and remove pulley (7) from the fan drive. The weight of the pulley is 35 kg (77 lb).3. Remove two bolts (3) and washers (4).4. Remove hub (8), the bearings and spacer from bracket assembly (11) as an assembly.5. Remove bearing (5) and spacer (6) from hub (8).6. Remove seal (9) and bearing (10) from the hub.7. Remove the spacer from bracket assembly (11). Remove the O-ring seal from the spacer. The following steps are for assembly of the fan drive.8. Put the O-ring seal in position in the spacer, and install the spacer on the bracket assembly.9. Install bearing (10) in hub (8).10. Install lip-type seal (9) in hub (8). Install the seal with the spring loaded lip toward the inside of the hub.11. Put hub (8) in position on bracket assembly (11).12. Install spacer (6) and bearing (5) in the hub.13. Put washers (4) in position on the bearing, and install bolts (3).14. Fasten a hoist to pulley (7). Put the pulley in position on the fan drive, and install the bolts that hold it.15. Put O-ring seal (1) in position in adapter (2). Install the adapter on the fan drive.End By:a. install fan drive

Parts shim Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.