AVSPARE.COM
parts catalog

SHIM 9W0296 - Caterpillar



9W0296 SHIM Caterpillar parts SHIM
Rating:
16
Alternative (cross code) number:
CA9W0296
9W-0296
9W0296
Caterpillar 9W0296 SHIM
Weight: 0.35 pounds 0 kg.

Buy SHIM 9W0296 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Start By:a. remove torque converter **This operation is in the 789 Truck Power Train, Disassembly And Assembly Manual. 1. Fasten a hoist and tooling (A) to flywheel (1).2. Remove two bolts (2), and install two 1" - 14 NF guide bolts approximately 203 mm (8 in) long.3. Remove the remainder of bolts (2), and remove flywheel (1). The weight of the flywheel is 140 kg (310 lb). 4. If necessary, remove ring gear (3) from flywheel (1). The following steps are for installation of the flywheel.5. If ring gear (3) was removed from the flywheel, heat the ring gear to a maximum temperature of 320° C (608° F). Install ring gear (3) on flywheel (1) with the tooth chamfer toward the engine when the flywheel is installed.6. Install two 1" - 14 NC guide bolts approximately 203 mm (8 in) long in the end of the crankshaft7. Fasten a hoist and tooling (A) to flywheel (1). Make sure the mark on the flywheel is aligned with the mark on the crankshaft when the flywheel is installed.8. Put flywheel (1) in position on the guide bolts.9. Put clean SAE 30 oil on the threads of bolts (2). Install 12 bolts (2) to hold the flywheel in place.10. Remove the hoist and tooling (A) and the guide bolts, and install the remaining bolts (2). Tighten bolts (2) to a torque of 800 N m (590 lb ft)11. Check the flywheel runout. See Specifications for 3500 Vehicular Engine For 789 Truck, Form No. SENR3423.End By:a. install torque converter **This operation is in the 789 Truck Power Train, Disassembly And Assembly Manual.
B. Ref. Seal location. Later models require a seal between the flywheel and the torque converter. If your machine is so equipped, be sure to install the seal when installation of the torque converter is made.


Parts shim Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.