AVSPARE.COM
parts catalog

SLEEVE 1C4110 - Caterpillar



1C4110 SLEEVE Caterpillar parts SLEEVE
Rating:
16
Alternative (cross code) number:
CA1C4110
1C-4110
1C4110
Caterpillar 1C4110 SLEEVE
Weight: 8 pounds 3 kg.

Buy SLEEVE 1C4110 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

1. Remove one bolt (2) from flywheel (1).2. Install Tool (A) to flywheel (1).3. Install a guide bolt in removed bolt hole.4. Use a hoist and Tool (A) to remove flywheel (1). The weight of the flywheel is 130 kg (285 lb). 5. Remove gear (3) from the flywheel if necessary.6. For installation, heat gear (3) to a maximum temperature of 315?C (600?F), and install it on flywheel (1) so the chamfer of the gear teeth will be toward the starter pinion when the flywheel is installed.7. Use a hoist and Tool (A) to install flywheel (1) to the crankshaft.8. Put clean engine oil on the threads of bolts (2) that hold the flywheel to the crankshaft.9. Install eleven bolts (2).10. Remove the guide bolt.11. Install remaining bolt (2).12. Tighten the bolts to a torque of 270 27 N m (200 20 lb ft).


Parts sleeve Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.