parts catalog

SLEEVE 2H9121 - Caterpillar

2H9121 SLEEVE Caterpillar parts D337 SLEEVE
Alternative (cross code) number:
Caterpillar 2H9121 SLEEVE

Buy SLEEVE 2H9121 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 2H9121:

MARINE ENGINE  D337   Caterpillar
Number on catalog scheme: None
  For full view, you need register


Torque for nuts: Items 3, 4, 7, 10, 11 and 20, (10 places) ... 12 4 N m (8.9 3 lb ft)Items 8, 9, 12, (four places), 13, 14, 15, and 16 are bearings. When replacement is necessary, use a driver only on the end that is stamped.Adjustment Procedure:
All linkage can be assembled and Steps 1 and 2 can be done with the platform removed from the tractor.Adjust zero steer setscrew (18) to get Dimension A of 106.5 2.0 mm (4.19 .08 in)2. If necessary, loosen bolt (19) and adjust the pedal angle until both pedals are the same. Tighten bolt (19).3. Lower the cab into position. Rotate control unit steering input lever (21) clockwise until contact (pressure) is felt.4. Hold the lever in this position and adjust end (2) until pin (1) fits freely through end (2) and lever (21).5. Increase the length of the rod by turning end (2) counterclockwise 3 additional turns. Tighten nut (3) and install the rod on lever (21) using pin (1) and a cotter pin.6. Do Steps 3, 4 and 5 for the rod and lever (22) use end (6), nut (7) and pin (5).

Caterpillar parts catalog:

Caterpillar parts catalog
D337 MARINE ENGINE 23B00300-00455

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.