3843848 SLEEVE-YM Caterpillar parts
Rating:
Alternative (cross code) number:
CA3843848
384-3848
3843848
CA3843848
384-3848
3843848
Weight: 1 pounds 0 kg.
Related part:
7N5656
SLEEVE-YM
3843848
CL
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B - Guide Bolt
(M16 x 2 by 4 inch) 1 Note: For information on the reusability of the flywheel on 3116 engines, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8207, "Flywheel Specifications for 3116 Engines".
Support the engine with blocks or a suitable lifting device.
Install Tooling (A) on the flywheel. Fasten a suitable lifting device to the flywheel.
Illustration 1 g00613482
Remove top bolt (1) and the washers. Install Tooling (B). Remove remaining bolts (1) and the washers.
Remove flywheel (2) from Tooling (B). The weight of flywheel (2) is approximately 23 kg (50 lb).
Inspect the flywheel ring gear. Replace the ring gear, if necessary. Place the flywheel on a wood block. Use a hammer and a punch in order to remove the flywheel ring gear.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B - Guide Bolt
(M16 x 2 by 4 inch) 1 Note: For information on the reusability of the flywheel on 3116 engines, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8207, "Flywheel Specifications for 3116 Engines".
Support the engine with blocks or a suitable lifting device.
Install Tooling (A) on the flywheel. Fasten a suitable lifting device to the flywheel.
Illustration 1 g00613482
Remove top bolt (1) and the washers. Install Tooling (B). Remove remaining bolts (1) and the washers.
Remove flywheel (2) from Tooling (B). The weight of flywheel (2) is approximately 23 kg (50 lb).
Inspect the flywheel ring gear. Replace the ring gear, if necessary. Place the flywheel on a wood block. Use a hammer and a punch in order to remove the flywheel ring gear.