AVSPARE.COM
parts catalog

SLIP JOINT GP 4646910 - Caterpillar



4646910 SLIP JOINT GP Caterpillar parts SLIP
Rating:
31
Alternative (cross code) number:
CA4646910
464-6910
4646910
Caterpillar 4646910 SLIP JOINT GP
Weight: 19 pounds 8 kg.

Buy SLIP JOINT GP 4646910 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 3
 
  For full view, you need register

Information:


Illustration 1 g00292776
Side view of the alternator
Illustration 2 g00292777
End view of the 12 volt alternator which shows the electrical connections
Note: Test the battery with a carbon pile 4C-4911 Battery Load Tester in order to measure the maximum output from the alternator. 12 volt alternator at 25°C (77°F) Polarity ... Negative ground to the caseRotation ... ClockwiseMinimum full load current at 5000 rpm ... 48.6 amperesMinimum full load current at 1500 rpm ... 20.7 amperesOutput voltage ... 14 0.5 voltsRated voltage ... 12 volts
Illustration 3 g00503643
End view of the 24 volt alternator which shows the electrical connections
Note: Test the battery with a carbon pile 4C-4911 Battery Load Tester in order to measure the maximum output from the alternator. 24 volt alternator at 25°C (77°F) Polarity ... Negative ground to the caseRotation ... ClockwiseMinimum full load current at 5000 rpm ... 47 amperesMinimum full load current at 1500 rpm ... 13.5 amperesOutput voltage ... 28 1 voltsRated voltage ... 24 volts (1) Tighten the pulley nut to the following torque. ... 45 to 55 N m (33 to 40 lb ft) (2) Tighten the terminal nut "W" to the following torque. ... 2 to 2.5 N m (17 to 22 lb in) (3) Tighten terminal nut "D+" to the following torque. ... 1.45 to 1.95 N m (13 to 17 lb in) (4) Terminal nut "B+" Tighten terminal nut "B+" on the 12 volt alternator to the following torque. ... 3.5 0.9 N m (31 8 lb in)Tighten terminal nut "B+" on the 24 volt alternator to the following torque. ... 7.75 0.25 N m (69 2 lb in) (5) Tighten terminal nut "B−" on the 24 volt alternator to the following torque. ... 3.6 0.8 N m (32 7 lb in)Alignment of the alternator pulley to the crankshaft pulley ... 2.4 mm (0.095 inch)

Caterpillar parts catalog:

Caterpillar parts catalog
918M Compact Wheel Loader H2600001-UP (MACHINE) POWERED BY C4.4 Engine
920K Compact Wheel Loader B9800001-UP (MACHINE) POWERED BY C4.4B Engine


Parts slip Caterpillar catalog:

2997700 SLIP JOINT GP
12K, 140K, 140K 2, 160K
1787983 SLIP JOINT GP
120H, 12H, 135H, 140H, 143H, 160H, 163H
2055847 SLIP JOINT GP
814F, 814F II, 815F, 815F II, 816F, 816F II
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.