SPACER 1694806 - Caterpillar

128-4773 Extension Assembly (8) is used to remove and install differential group (holds group in a horizontal position) on 785, 789, and 793 Trucks. This adapter has a working load limit (WLL) of 1145 kg (2525 lb). 151-7537 Lifting Bracket Group
Illustration 15 g02280933
(1) 226-2380 Lift Bracket As (9) 151-7537 Lifting Bracket Group 151-7537 Lifting Bracket Group (9) is used to remove and install compactor pods on CT/CPA 533C, CT/CPA 563C, and CT583C Vibratory Compactors. The adapter bracket assembly weighs 39 kg (85 lb). The adapter has a working load limit (WLL) of 455 kg (1000 lb). 152-7247 Lifting Bracket Group
Illustration 16 g02280953
(1) 226-2380 Lift Bracket As (6) 226-2379 Tube As (10) 152-7247 Lifting Bracket Group 152-7247 Lifting Bracket Group (10) is used to remove and install final drive planetary carriers on 785789, 793, and 797 Trucks and 994 Wheel Loader. The outer carrier adapter assembly weighs 32 kg (71 lb). This adapter has a working load limit (WLL) of 1380 kg (2954 lb). 9U-6122 Lifting Adapter Group
Illustration 17 g02281037
(1) 226-2380 Lift Bracket As (11) 9U-6122 Lifting Adapter Group 9U-6122 Lifting Adapter Group (11) is used to remove and install inner planetary carriers on the 793 Truck and 994 Wheel Loader. This adapter has a working load limit (WLL) of 295 kg (650 lb). 153-1174 Lifting Bracket Group
Illustration 18 g02281053
(1) 226-2380 Lift Bracket As (12) 153-1174 Lifting Bracket Group 153-1174 Lifting Bracket Group (12) is used to remove and install the inner planetary carrier on 797 Trucks. The handling bracket assembly weighs 14 k g (31 lb). This adapter has a working load limit (WLL) of 510 kg (1125 lb). 153-1175 Lifting Bracket Group
Illustration 19 g02281154
(1) 226-2380 Lift Bracket As (13) 153-1175 Lifting Bracket Group 153-1175 Lifting Bracket Group (13) is used to remove and install the ring gear on the 797 Truck. The handling bracket assembly weighs 17 kg (37 lb). This adapter has a working load limit (WLL) of 930 kg (2045 lb). 271-2769 Adapter Assembly
Illustration 20 g02281121
(1) 226-2380 Lift Bracket As (9) 271-2769 Adapter Assembly 271-2769 Adapter Assembly (9) is used to remove or install MEI air conditioners. The lifting adapter assembly weighs 13.2 kg (29 lb). This adapter has a working load limit (WLL) of 60.8 kg (134 lb).Inspection and Maintenance Section
Inspect the lifting bracket group, adapter plates, and bracket extension assemblies before each use. Immediately replace any damaged tools.Inspection
Inspect all welds, and check for damaged, cracked, or bent components.
Have the tools inspected annually by an approved dealership inspector.Maintenance
Periodically lubricate the ACME threaded rod using 222-3116 Lubricant , or equivalent.
Replace any damaged or missing films.Storage
Tooling can be damaged by moisture or high humidity. Store the tools indoors in a clean, dry location.Store tools laying flat or hanging from appropriate hooks to prevent falling.Disposal
At the end of the tools operational life, destroy the tool and dispose of as scrap.