parts catalog

SPECIAL AR 3157360 - Caterpillar

3157360 SPECIAL AR Caterpillar parts SPECIAL
Alternative (cross code) number:
Caterpillar 3157360 SPECIAL AR

Buy SPECIAL AR 3157360 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 1 g01405580
Table 1
Specification for 213-3193 Connecting Rod
Item Qty Part Specification Description
A 1 211-0595 Connecting Rod Handle the fractured connecting rod with care. Use a soft jawed vise in order to hold the connecting rod while loosening the connecting rod cap bolts. Use a soft faced hammer in order to tap the connecting rod cap, if necessary.
Bore for piston pin bearing is 43.191 0.013 mm (1.7004 0.0005 inch).
B 1 2W-0027 Bearing After installation, bore in the bearing is 40.028 0.008 mm (1.5759 0.0003 inch).
C - - The bearing joint for the piston pin bearing must be positioned to the angle above the centerline on either side is 12 5 degrees.
D - - Before installation of the piston pin bearing, connecting rod small end must be heated from 175 to 260 °C (347 to 500 °F).
Distance for heating the connecting rod for the installation of the piston pin bearing is 75 5 mm (3.0 0.2 inch).
E - - Distance between the center of the connecting rod bores is 200 mm (7.9 inch).
F - - Bore in the connecting rod for the bearing for the crankshaft connecting rod journal is 75.000 0.013 mm (2.9527 0.0005 inch).
G 2 229-6266 Bolt Length of the bolt is 65.0 0.5 mm (2.56 0.02 inch).
- - - Use the following procedure to tighten the connecting rod bolts:
1. Before installing the rod cap, clean the mating surfaces of the connecting rod with compressed air or a steel brush.
2. Lubricate the seating faces of the cap with 4C-5599 Anti-Seize Compound or clean engine oil .
2. Install new bolts (1) and torque each bolt to 70 5 N m (50 4 lb ft).
3. Place an index mark on each connecting rod cap bolt and tighten each bolt for an additional turn of 120 5 degrees.

Parts special Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.