AVSPARE.COM
parts catalog

SPLINE HUB 1C3949 - Caterpillar



1C3949 SPLINE HUB Caterpillar parts SPLINE
Rating:
66
Alternative (cross code) number:
CA1C3949
1C-3949
1C3949
Caterpillar 1C3949 SPLINE HUB
Weight: 10 pounds 4 kg.

Buy SPLINE HUB 1C3949 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Spade Drill Blade And Hole Diameter Required
Parts And Torque Required
Procedure For Drilling Segment Bolt Holes
(1) Remove bolt-on adapters (if equipped).(2) Working from the top of the base edge, scribe a line the length of the bucket through the center of front adapter bolt holes (1).(3) Place an appropriate segment on the base edge so that it is centered between any two sets of center adapter bolt holes. The line scribed earlier should be visible through the segment bolt holes. (Contact your Parts Department for appropriate segment part number.)(4) Mark the center of each segment hole (X) on the scribed line. Repeat this procedure for each center segment location.(5) Position an end segment (2) so that one bolt hole is directly over a front end bit hole (3). With these holes aligned, move the segment until the scribed line is visible through bolt hole (4). Mark the center of hole (4) on the scribed line.(6) Repeat this procedure for the other end of the bucket.(7) With a titanium-nitride-coated spade drill blade, drill the twelve holes marked with an (X).(8) Install the segments with bolts and nuts specified, and tighten the nuts to the torque given.


Parts spline Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.