AVSPARE.COM
parts catalog

SPOOL AS 1695461 - Caterpillar



1695461 SPOOL AS Caterpillar parts 69D, 769D, 771D SPOOL
Rating:
63
Alternative (cross code) number:
CA1695461
169-5461
1695461
Caterpillar 1695461 SPOOL AS
Weight: 3 pounds 1 kg.

Buy SPOOL AS 1695461 Caterpillar genuine, new aftermarket tractor parts with delivery
QUARRY TRUCK, TRUCK,

Compatible equipment models: 1695461:

QUARRY TRUCK  771D  
TRUCK  69D   769D   Caterpillar
Number on catalog scheme: 27
 
  For full view, you need register

Information:


Illustration 1 g00501544
(1) Screws (2) Limit switch (3) Cab rear cover
Remove two 9X-2042 Screws (1) in order to remove 128-2116 Limit Switch (2).
Illustration 2 g00501739
(3) Cab rear cover (4) Four screws
Remove the lead wire underneath 122-9627 Cab Rear Cover (3) .
Remove the lead wire by pulling the wire through the clearance between the 122-9627 Cab Rear Cover (3) and the cab frame. Pull the wire gently.Note: Do not cut the lead wire of the limit switch (2) .
Secure the limit switch (2) with adhesive tape to the cab wall. The limit switch (2) should not interfere with the removal of the cab rear cover (3) .See Illustration 1 for the location of the limit switch (2) and screws (1) .
Remove the cab rear cover (3) by loosening four 9X-2044 screws (4) .Note: The cab rear cover (3) can be deformed at the push-pull cable without cracking the cover. Use care not to cut the four nails for the cab rear cover. The four nails fall in the slits of the cab frame. The four slits can be seen from the bottom of the cab rear cover (3) .Note: Do not twist 128-2127 Push-Pull Cable (12). Do not twist 128-2128 Push-Pull Cable (12). See Illustration 7 for the location of the push-pull cables.
Illustration 3 g00501770
(5) Connector between motor and controller (6) Connector between cab and controller
Illustration 4 g00501782
(7) Connector between limit switch and controller
Turn the key switch OFF and disconnect the following three connectors: (A) Disconnect the connector (5) between the motor and the controller. (B) Disconnect the connector (6) between the limit switch and the controller. (C) Disconnect the 7Y-3968 Connector (7) between the cab and the controller.Note: See Illustration 3 and 4 for the location of the connectors.
Illustration 5 g00501824
(8) Three screws hold the drive assembly to the cab. (9) Two screws hold the push-pull cable assembly and the drive assembly together. (10) Two screws
Illustration 6 g00501888
Push-pull cable assembly (11) Eight clips
Illustration 7 g00489836
Drive assembly (12) Push-pull cable (13) GearNote: Press firmly against all the screw heads in order to prevent damage to the screw heads.
Follow these procedures for adjusting the front window: (A) Loosen three screws (8). Refer to Illustration 5.Note: Support the gear motor. Do not drop the eight clips. Refer to Illustration 6. (B) Loosen two screws (9). Refer to Illustration 5.Note: Do not loosen the two screws (10). Refer to Illustration 5. (C) Disengage the gear motor completely from the push-pull cables in order to allow the front window to slide freely.Note: Do not drop the window.Note: Refer to Illustration 7 for the location of the gear motor and the push-pull cables. Everything is completely disengaged. (D) Engage the gear motor with the push-pull cables. Hold the bottom end of the front window in order to maintain a horizontal position of the front window. If the gear motor does not engage the cables turn the gear manually to the nearest tooth engagement.Installation for the Push-Pull Cables of the Front Power Window

Caterpillar parts catalog:

Caterpillar parts catalog
769D Off-Highway Truck 5TR00001-00504 (MACHINE) POWERED BY 3408E Engine
771D Truck 6JR00001-00134 (MACHINE) POWERED BY 3408E Engine
769D Off-Highway Truck 5SS00001-UP (MACHINE) POWERED BY 3408E Engine
769D Truck 5TR00505-UP (MACHINE) POWERED BY 3408E Engine
771D Truck 6JR00135-UP (MACHINE) POWERED BY 3408E Engine
771D Truck 6YS00001-UP (MACHINE) POWERED BY 3408E Engine
769D Off-Highway Truck BBB00001-UP (MACHINE) POWERED BY 3408E Engine
771D Quarry Truck BCA00001-UP (MACHINE) POWERED BY 3408E Engine


Parts spool Caterpillar catalog:

7U5921 SPOOL-VALVE
D25D, D350E, D400E, D40D
1216983 SPOOL-DIRECTION SELECTOR
AD30, D350E, D350E II, D400E
6Y2279 SPOOL-DIFFERENTIAL
AD30, D350E, D350E II, D400E
1216984 SPOOL-SPEED SELECTOR
AD30, D350E, D350E II, D400E
2U7292 SPOOL
D250D, D250E, D300D, D300E
9U9058 SPOOL AS-ROTARY
69D, 768C, 769C, 769D, 771C, 771D
1771880 SPOOL AS-ROTARY
735, 740, AD40, AD45, AD45B, AD55, AE40, AE40 II, D400E II
1767368 SPOOL AS-ROTARY
773D, 773E, 775D, 775E
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.