AVSPARE.COM
parts catalog

SPRING 0005617 - Caterpillar



0005617 SPRING Caterpillar parts SPRING
Rating:
71
Alternative (cross code) number:
CA0005617
000-5617
0005617
Caterpillar 0005617 SPRING
Weight: 0.02 pounds 0 kg.

Buy SPRING 0005617 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Drain the hydraulic system oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Do not lower the bottom guard while under the machine. Injury could occur if the bottom guard slips off of the jack while it is being lowered.
Note: Bottom guards may contain approximately 90 kg (200 lb) of the following objects: loose bolts, tools, rocks, dirt, liquids and debris.
Illustration 1 g00835558
Use Tooling (B) to support middle bottom guard (1). The weight of middle bottom guard (1) is approximately 35 kg (77 lb). Remove the bolts and the middle bottom guard. Note: The floor access plate must be removed for later attachment of the Tooling to the piston pump.
Illustration 2 g00835327
Remove footrests (2) and floormat (3).
Illustration 3 g00835329
Remove floor access plate (4) from the machine.
Illustration 4 g00835331
Remove bolts (5) and air ducting (6).
Illustration 5 g00835355
Disconnect harness assemblies (7) and (8).
Illustration 6 g00835377
Disconnect harness assemblies (9) and (10).
Illustration 7 g00835409
Remove hose assemblies (11) and (12). Remove tube assembly (13). Remove hose assemblies (14) and (15).
Illustration 8 g00835422
Disconnect hose assembly (16). Remove hoses (17) and (19). Disconnect hose assembly (18).
Illustration 9 g00835461
Disconnect hose assembly (20) for the test port. Disconnect hose assemblies (21) and (22).
Illustration 10 g00835464
Disconnect hose assemblies (23) and (24).
Illustration 11 g00835466
The above view is from the underside of the machine.
Disconnect hose assemblies (25), (26), and (27). Disconnect hose assemblies (28), (29), and (30).
Illustration 12 g00835474
Illustration 13 g00835513
Use Tooling (A) and Tooling (B) in order to support pumps (32). The weight of the pumps is approximately 77 kg (170 lb). Remove bolts (31) and lower the two pumps together through the access hole in the bottom of the machine.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.