2H9200 SPRING Caterpillar parts D337 SPRING
Alternative (cross code) number:
Weight: 0.02 pounds 0 kg.
Compatible equipment models: 2H9200:
MARINE ENGINE D337 Caterpillar
1. Stop the machine with the bucket flat on the ground. Remove bolt (1) from the pin that holds the link to the bucket. 2. Install tooling (A), and fasten a hoist to the tooling so it will not fall when the pin is removed. Use tooling (A) to remove the pin that holds the link to the bucket.3. Start the machine and extend or retract the tilt cylinder until the bucket lever is in a vertical position. 4. Remove grease fitting (2) from the pin. Remove bolt (3) that holds the pin in place. 5. Install tooling (B) as shown, and fasten a hoist to the tooling so it will not fall when the pin is removed. Fasten a hoist to the tilt cylinder so it will not fall when the pin is removed. Use tooling (B) to remove pin (4) from the bucket lever.6. Lower tilt cylinder so the head of the cylinder is against the lift arm torque tube. 7. Remove bolt (5) and the grease fitting from the hole in pin (6). 8. Fasten a strap and hoist to bucket lever (7).9. Install tooling (B) on the pin, and fasten a hoist to the tooling so it cannot fall when the pin is removed. Use tooling (B) to remove the pin from the bucket lever.10. Remove bucket lever (7) and link from the lift arms. Weight of the 943 bucket