AVSPARE.COM
parts catalog

STATOR GP-MAIN 4646073 - Caterpillar



4646073 STATOR GP-MAIN Caterpillar parts STATOR
Rating:
11
Alternative (cross code) number:
CA4646073
464-6073
4646073
Caterpillar 4646073 STATOR GP-MAIN

Buy STATOR GP-MAIN 4646073 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 3
 
  For full view, you need register

Information:

Removal Procedure
Start By:
Remove the flexible exhaust pipe from the turbocharger. Refer to Disassembly and Assembly, "Flexible Exhaust Pipe - Remove and Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03790856
Loosen hose clamps and disconnect the hose assemblies from turbocharger inlet (6) and from turbocharger outlet (3).
Remove banjo bolt (1) from tube assembly (13). Remove sealing washers (2) (not shown).
Disconnect tube nut (14) and remove tube assembly (13) from turbocharger (10) and the cylinder block.
If equipped, Remove hose clamp (4) from hose assembly (5). Disconnect the hose assembly from turbocharger (10).
Remove hose clamp (8) from hose assembly (7). Disconnect the hose assembly from wastegate actuator (9).
Remove bolts (12) from tube assembly (15).
Remove gasket (11) (not shown).
Illustration 2 g03826972
If necessary, follow Step 8.a through Step 8.f in order to remove tube assembly (15) from the cylinder block.
Drain the coolant from the coolant system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Remove bolts (16) and bolts (16A). Position tube assembly (20) away from oil cooler (22).
Remove O-ring seal (17) (not shown) from tube assembly (20).
Remove bolt (18) from bracket (19). Position bracket away from oil cooler (22).
Remove tube assembly (15) from the cylinder block. Ensure that the tube assembly is not damaged as the tube assembly is removed from the cylinder block.
Remove O-ring seals (21) (not shown) from tube assembly (15).
Illustration 3 g03790858
Remove nuts (25) from turbocharger (10).
Remove turbocharger (10) from exhaust manifold (23). Note: Do not use the actuator rod to lift the turbocharger.
Remove gasket (24) (not shown).
If necessary, remove the studs (26) from turbocharger (10) and exhaust manifold (23).
Illustration 4 g03790859
If necessary, follow Step 13.a through Step 13.g in order to remove boost pressure chamber cover (38).
Remove alternator (31) and the mounting bracket. Refer to Disassembly and Assembly, "Alternator - Remove and Install" for the correct procedure.
Remove bolts (36) and remove boost pressure chamber cover (38) from the oil cooler. Note: Note the position of different length bolts.
Remove hose assembly (7) and hose assembly (28) from clips (32), clip (27), and clip (33).
Remove banjo bolt (34) and remove sealing washers (35) (not shown) from hose assembly (7). Remove the hose assembly boost pressure chamber cover (28).
Loosen hose clamp (29) and disconnect hose assembly (28) from wastegate solenoid (30).
Remove banjo bolt (39) and remove sealing washers (40) (not shown) from hose assembly (28). Remove the hose assembly boost pressure chamber cover (28).
Remove gasket (37) (not shown).

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
G3512 Generator Set E2P00001-UP
G3512 Generator Set E2T00001-UP
C32 Generator Set FLX00001-UP
3512 Generator Set LNF00001-UP
3512B Generator Set LY800001-UP
3512 Generator Set LY700001-UP
C32 Generator Set JTW00001-UP
C32 Generator Set PAE00001-UP
C32 Generator Set for LRC NRC00001-UP
3512 Generator Set ZAF00001-UP
C32 Generator SET JSJ00001-UP
3512 Generator Set YAK00001-UP
C32 Generator Set JAZ00001-UP
3512 Generator Set YBA00001-UP
3512 Generator Set JM200001-UP
C32 Generator Set JTW00001-UP
C32 Generator Set P7E00001-UP


Parts stator Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.