AVSPARE.COM
parts catalog

STRAP, COOLER EGR 7095352C1 - Caterpillar



7095352C1 STRAP, COOLER EGR Caterpillar parts STRAP
Rating:
61
Alternative (cross code) number:
CA7095352C1
70953-52C1
7095352C1
Caterpillar 7095352C1 STRAP, COOLER EGR

Buy STRAP, COOLER EGR 7095352C1 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 3
 
  For full view, you need register

Information:

Release Hydraulic System Pressure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Hydraulic oil pressure can remain in the hydraulic system on this machine after the engine and pump have been stopped. Serious injury can result if this pressure is not released before any service is done on the hydraulic system. In order to prevent possible injury, release the hydraulic system pressure before working on any fitting, hose, or hydraulic component.Lower all work tools to the ground before service is started. If the hydraulic system must be serviced, tested, or adjusted with the work tool in the raised position, the work tool and lift cylinders must be supported properly.Always move the machine to a location away from the travel of other machines. Be sure that other personnel are not near the machine when the engine is running and tests or adjustments are being made.
Escaping fluid under pressure, even a pinhole size leak, can penetrate body tissue, causing serious injury, and possible death. If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.Always use a board or cardboard when checking for a leak.
Park the machine on a smooth, level surface. The location should also be dry and free of debris. Stop the engine.
Lower the felling head to the ground.
Engage the parking brake.
Stop the engine.
Turn the engine start switch to the ON position without starting the engine.
Place the hydraulic control lever lock in the UNLOCKED position.
Move the joysticks and the pedals through the full range of travel. This will relieve any pressure that may be present in the hydraulic system. Note: If the hydraulic circuit requires the activation of a switch for operation, activate the necessary switches for the operation of the hydraulic circuit.
Illustration 1 g00926057
Open rear grill assembly (1).
Illustration 2 g00925793
Push in plunger (2) for the hydraulic tank breaker relief valve until all pressure is released.

Caterpillar parts catalog:

Caterpillar parts catalog
CT13 SCR ON HIGHWAY TRUCK ENGINE JFB00001-UP
CT13 ON HIGHWAY TRUCK ENGINE KBK00001-UP
CT13 SCR ON HIGHWAY TRUCK ENGINE JFB00001-UP
CT13 ON HIGHWAY TRUCK ENGINE KBK00001-UP


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.