AVSPARE.COM
parts catalog

SUPPORT GP-CONTROL 2333224 - Caterpillar



2333224 SUPPORT GP-CONTROL Caterpillar parts 120M, 12M, 140M, 14M, 160M, 16M, 24M SUPPORT
Rating:
28
Alternative (cross code) number:
CA2333224
233-3224
2333224
Caterpillar 2333224 SUPPORT GP-CONTROL
Weight: 29 pounds 13 kg.

Buy SUPPORT GP-CONTROL 2333224 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compatible equipment models: 2333224:

MOTOR GRADER  120M   12M   140M   14M   160M   16M   24M   Caterpillar
Number on catalog scheme: 4
 
  For full view, you need register

Information:


To prevent possible personal injury, hold the final drive planetary carrier assembly level when it is being removed and installed. The planetary gears and shafts can fall out of the planetary carrier if the unit is not held level during removal and installation.
1. Remove 22 bolts (1) and the washers that hold the final drive planetary carrier assembly to the wheel assembly. 2. Fasten a hoist to final drive planetary carrier assembly (2), and remove it from the hub. The weight of the final drive planetary carrier assembly is approximately 150 kg (330 lb).3. Remove the O-ring seal from the final drive planetary carrier assembly. The following steps are for the installation of the final drive planetary carrier assemblies.4. Check the condition of the O-ring seal used on the final drive planetary carrier assembly. If the seal is damaged, use a new part for replacement. Install the O-ring seal on the final drive planetary carrier assembly. 5. Fasten a hoist to final drive planetary carrier assembly (2). Install the gear end of the drive axle shaft into the final drive planetary carrier assembly as shown. The drive axle shaft is used to hold the final drive planetary carrier assembly level and to help put the planetary gears in the carrier assembly in alignment with the hub.6. Put the final drive planetary carrier assembly in position in the hub. Remove the drive axle shaft and the hoist.7. Install the 22 washers and bolts (1) that hold the final drive planetary carrier assembly in position.8. Be sure the flats on the three planetary shafts in the final drive planetary carrier assembly are facing toward the outside of the carrier. If the flats are in the wrong position, the cover for the final drive cannot be installed.End By:a. install drive axle shaftsDisassemble & Assemble Final Drive Planetary Carriers
Start By:a. remove final drive planetary carrier assemblies 1. Put the final drive planetary carrier assembly on wood blocks as shown.2. Remove planetary shaft (1) and the retainer ring from the planetary carrier. Remove planetary gear (3) and two spacers (2) from the planetary carrier. 3. Remove two roller bearings (4) and spacer (5) from planetary gear (3).4. Remove the other two planetary gears from the final drive planetary carrier assembly as in Steps 1 through 3. The following steps are for the assembly of the final drive planetary carriers.6. Install two roller bearings (4) and spacer (5) in planetary gear (3).7. Put a spacer (2) on each side of the planetary gear. Put the planetary gear, with the spacers, in position in the planetary carrier.8. Install the retainer ring and planetary shaft (1) that holds the planetary gear in position. Turn planetary shaft (1) in the planetary carrier until the flat side of the shaft is toward the outside of the planetary carrier as shown.9. Install the other two planetary gears in the planetary carrier as in Steps 6 through 8.End By:a. install final drive planetary carrier assemblies

Caterpillar SIS machinery equipment:

Caterpillar SIS

Cat SIS web machinery list:

Caterpillar parts catalog
24M Motor Grader B9K00001-UP (MACHINE) POWERED BY C18 Engine
16M Motor Grader B9H00001-UP (MACHINE) POWERED BY C13 Engine
14M Motor Grader B9J00001-UP (MACHINE) POWERED BY C11 Engine
160M Motor Grader B9L00001-UP (MACHINE) POWERED BY C9 Engine
120M Motor Grader B9N00001-UP (MACHINE) POWERED BY C6.6 Engine
140M Motor Grader B9M00001-UP (MACHINE)
160M Motor Grader B9E00001-UP (MACHINE) POWERED BY C9 Engine
12M Motor Grader B9R00001-UP (MACHINE) POWERED BY C6.6 Engine
140M Motor Grader B9D00001-UP (MACHINE)
12M Motor Grader B9F00001-UP (MACHINE) POWERED BY C6.6 Engine
120M Motor Grader B9C00001-UP (MACHINE) POWERED BY C6.6 Engine
120M Motor Grader- (US Army) CBS00001-UP (MACHINE) POWERED BY C6.6 Engine
120M Motor Grader - All Wheel Drive B9W00001-UP (MACHINE) POWERED BY C6.6 Engine
120M Motor Grader - All Wheel Drive D9W00001-UP (MACHINE) POWERED BY C6.6 Engine
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY C9 Engine
140M Motor Grader - All Wheel Drive D9G00001-UP (MACHINE) POWERED BY C9 Engine
160M Motor Grader - All Wheel Drive B9T00001-UP (MACHINE) POWERED BY C9 Engine
160M Motor Grader - All Wheel Drive D9T00001-UP (MACHINE) POWERED BY C9 Engine
120M AWD Motor Grader (US Navy) PJB00001-UP (MACHINE) POWERED BY C6.6 Engine
120M AWD Motor Grader (US Marine) NJD00001-UP (MACHINE) POWERED BY C6.6 Engine
120M AWD Motor Grader RMY00001-UP (MACHINE) POWERED BY C6.6 Engine
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine
12M Motor Grader R9B00001-UP (MACHINE) POWERED BY C6.6 Engine
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED BY C6.6 Engine
120M AWD Motor Grader (US Marine) NJD00001-UP (MACHINE) POWERED BY C6.6 Engine
14M Motor Grader R9J00001-UP (MACHINE) POWERED BY C11 Engine
16M Motor Grader R9H00001-UP (MACHINE) POWERED BY C13 Engine


Parts support Caterpillar catalog:

3337449 SUPPORT AS
12M, 12M 2, 140M, 140M 2, 160M 2
4173099 SUPPORT AS
12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M 2
4173098 SUPPORT AS
12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M 2
4172949 SUPPORT AS
12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M 2
4172950 SUPPORT AS
12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M 2
2666026 SUPPORT
120K, 120K 2, 12K, 12M, 140K, 140K 2, 140M, 160K
3097496 SUPPORT AS
120M, 12M, 12M 3, 12M 3 AWD, 140M, 140M 3, 140M 3 AWD, 160M, 160M 3, 160M 3 AWD
7E0504 SUPPORT GP-ENGINE
621F, 627F, 631E, 637E, 988F, PM-565
7C7743 SUPPORT GP-ENGINE & TMSN
935B, 935C, 935C II, D4B, D4C, D4C II
1661790 SUPPORT GP-ENGINE
D6R, D6R II, D6R III, D6R STD, D6T, D7R XR
1783904 SUPPORT GP-SEAT
844, 844H, 854G, 854K, 990 II, 990H, 994F
7N0744 SUPPORT GP-ENGINE
3304, 3304B, 3306, 3306B, 3306C, D250B, D25C, D25D, D300B, D300D, D30C, D350C, D35C
3797425 SUPPORT AS-SOUND SUPPRESSION
320D2, 320D2 GC, 320D2 L, 323D2 L
1008355 SUPPORT GP-ENGINE & XMSN
933, 939, D3C III, D4C III, D5C III
3979009 SUPPORT AS-SOUND SUPPRESSION
320D2, 320D2 GC, 320D2 L, 323D2 L
5G0378 SUPPORT GP-UNDERCARRIAGE
933, D3, D3B, D3C, D3C II, D3C III, D4B, D4C, D4C II
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.