AVSPARE.COM
parts catalog

SUPPORT AS 3156356 - Caterpillar



3156356 SUPPORT AS Caterpillar parts 797, 797B SUPPORT
Rating:
29
Alternative (cross code) number:
CA3156356
315-6356
3156356
Caterpillar 3156356 SUPPORT AS
Weight: 11 pounds 5 kg.

Buy SUPPORT AS 3156356 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

Compatible equipment models: 3156356:

TRUCK  797   797B   Caterpillar
Number on catalog scheme: 1
 
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 278-2636 Front Oil Seal Removal Tool 1 Start By:
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02048634
Position Tooling (A) on the nose of the crankshaft. Screw Tooling (A) into crankshaft front seal (2). Note: Do not damage the edge of the front cover for the crankshaft front seal.
Screw the bolt into Tooling (A) in order to remove crankshaft front seal (2) from front cover (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
B 9U-6206 Stud Front Seal Installer 1
9U-6207 Plate 1
9U-6209 Sleeve Plate 1
9U-6211 Seal Installer Tool 1
366-5984 Installer Assembly 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the bore for the crankshaft front oil seal in the front cover is clean and free from damage.
Illustration 2 g03417117
Assemble Tooling (B).
Correctly position a new crankshaft front seal (2) to front cover (1). Note: If the crankshaft front seal is supplied with a sleeve, remove the sleeve from the crankshaft front seal before installation.
Use Tooling (B) to install crankshaft front seal (2) to front cover (1). Ensure that the front face of the crankshaft front seal is installed to a depth of 6.5 0.2 mm (0.256 0.008 inch).
Remove Tooling (B) from the crankshaft. End By:
Install the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Install" for the correct procedure.

Caterpillar parts catalog:

Caterpillar parts catalog
3512E Petroleum Engine BZ300001-UP
994K Wheel Loader SMX00001-UP (MACHINE) POWERED BY 3516 Engine
797 Off-Highway Truck 5YW00001-UP (MACHINE)
797 Off-Highway Truck 5YW00001-UP (MACHINE) POWERED BY 3524B Engine
797B Off-Highway Truck JSM00001-UP (MACHINE)
994K Wheel Loader MM900001-UP (MACHINE) POWERED BY 3516B Engine
994K Wheel Loader MRK00001-UP (MACHINE) POWERED BY 3516B Engine


Parts support Caterpillar catalog:

3025925 SUPPORT GP-ENGINE
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, C175-16
4P5211 SUPPORT-ALTERNATOR
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797, 797B...
3200917 SUPPORT
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B
3142500 SUPPORT AS
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F
3381787 SUPPORT
797, 797B, 797F
3381786 SUPPORT
797, 797B, 797F
3310697 SUPPORT
797, 797B, 797F
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.