3599883 SUPPORT AS Caterpillar parts 3516C, C175-16 SUPPORT
Rating:
Alternative (cross code) number:
CA3599883
359-9883
3599883
CA3599883
359-9883
3599883
GENERATOR SET,
Number on catalog scheme:
For full view, you need register
3599883
Images:
Information:
Disassembly Procedure
Start By:
Remove the track rollers. Refer to Disassembly and Assembly, "Track Roller - Remove" in this manual.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Thoroughly clean the outside of the track roller prior to disassembly.
Illustration 1 g00812564
Remove drain plug (1) from the track roller. Drain the oil from the track roller into a suitable container for disposal. The capacity of the track roller is 437 25 mL (14.8 .8 oz).
Illustration 2 g00489952
Put the track roller in a press, as shown. The weight of the track roller is 40 kg (88 lb). Press downward on end collar (3). Remove snap ring (2). Release the pressure on the end collar. Remove end collar (3) .
Remove plug (1) from the inside of the track roller.
Illustration 3 g00489955
Remove Duo-Cone seal (4) from end collar (3) .
Illustration 4 g00489958
Remove the O-ring seal from shaft (5). Remove shaft (5) from roller (6) .
Illustration 5 g00489962
Remove Duo-Cone seal (9) from end collar (8) .
Remove spring pin (7) from end collar (8) and shaft (5). Use a press to remove shaft (5) from end collar (8). Remove the remaining O-ring seal from shaft (5). Remove the stopper from the end of the shaft.
Illustration 6 g00489963
Remove Duo-Cone seal (10) from each end of the track roller.
Illustration 7 g00489968
Use a press to remove bearing (11) from each end of the track roller.
Start By:
Remove the track rollers. Refer to Disassembly and Assembly, "Track Roller - Remove" in this manual.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Thoroughly clean the outside of the track roller prior to disassembly.
Illustration 1 g00812564
Remove drain plug (1) from the track roller. Drain the oil from the track roller into a suitable container for disposal. The capacity of the track roller is 437 25 mL (14.8 .8 oz).
Illustration 2 g00489952
Put the track roller in a press, as shown. The weight of the track roller is 40 kg (88 lb). Press downward on end collar (3). Remove snap ring (2). Release the pressure on the end collar. Remove end collar (3) .
Remove plug (1) from the inside of the track roller.
Illustration 3 g00489955
Remove Duo-Cone seal (4) from end collar (3) .
Illustration 4 g00489958
Remove the O-ring seal from shaft (5). Remove shaft (5) from roller (6) .
Illustration 5 g00489962
Remove Duo-Cone seal (9) from end collar (8) .
Remove spring pin (7) from end collar (8) and shaft (5). Use a press to remove shaft (5) from end collar (8). Remove the remaining O-ring seal from shaft (5). Remove the stopper from the end of the shaft.
Illustration 6 g00489963
Remove Duo-Cone seal (10) from each end of the track roller.
Illustration 7 g00489968
Use a press to remove bearing (11) from each end of the track roller.