AVSPARE.COM
parts catalog

SUPPORT AS 4645601 - Caterpillar



4645601 SUPPORT AS Caterpillar parts SUPPORT
Rating:
56
Alternative (cross code) number:
CA4645601
464-5601
4645601
Caterpillar 4645601 SUPPORT AS
Weight: 2 pounds 1 kg.

Buy SUPPORT AS 4645601 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 8
 
  For full view, you need register

Information:


Select "Configuration" from the "Service"menu.
Illustration 26 g06246654
Expand the list for "Control Input Installations and Configurations". Highlight the parameter to change and click the "Change" button on the lower left corner.
Illustration 27 g06246658
Select the appropriate "Control Input" for the controls installed on the machine. Press OK to enter the change.Reference: Refer to "Control Installation Parameter Descriptions" for descriptions of each of the Tool Installation parameters that are available for the tool control system.Control Installation Parameter Descriptions
Table 4
Control Installation Parameter Descriptions
Cat ET Name Monitor Name Description Explanation
Joystick Handle Configuration "Joystick Handle" Type of joystick handle Set type of joystick handle installed on the machine.
Type of handle:
"Basic Handle": Lever installed on the standard machine
"Joystick Switch": Lever with 4 buttons on standard lever
"Modulation Handle": Lever with thumb wheel and 3 buttons
Left Attachment Pedal Installation Status "Left Attachment Pedal" Installation setting of left ATT pedal Set installation condition of left ATT pedal.
Right Attachment Pedal Installation Status "Right Attachment Pedal" Installation setting of right ATT pedal Set installation condition of right ATT pedal.
Left Joystick Switch #2 Control Mode "Left Joystick Switch #2" Operating target of left joystick switch #2 Set ATT valve and switching operation to be operated by left joystick switch #2.
"Momentary" is selected to press and hold the switch for tool activation.
"Toggled" is selected to press for tool activation ON and press again for tool activation OFF.
If the handle type is "Basic Handle", then setting is not required.
Left Joystick Switch #3 Control Mode "Left Joystick Switch #3" Operating target of left joystick switch #3 Set ATT valve and switching operation to be operated by left joystick switch #3.
"Momentary" is selected to press and hold the switch for tool activation.
"Toggled" is selected to press for tool activation ON and press again for tool activation OFF.
If the handle type is "Basic Handle", then setting is not required.
Left Joystick Switch #4 Control Mode "Left Joystick Switch #4" Operating target of left joystick switch #4 Set ATT valve and switching operation to be operated by left joystick switch #4.
"Momentary" is selected to press and hold the switch for tool activation.
"Toggled" is selected to press for tool activation ON and press again for tool activation OFF.
Handle is limited to "Joystick Switch" alone.
Right Joystick Switch #1

Caterpillar parts catalog:

Caterpillar parts catalog
AP255E Asphalt Paver D8A00001-UP (MACHINE) POWERED BY C2.2 Engine


Parts support Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.