SWASHPLATE 62000089 - Caterpillar

Illustration 1 g00900972
(1) Lubricate the seals with a thin covering of lubricant that is being sealed. (2) Center the bearing in the bore. The depth (A) on each side of the bearing will be identical.Depth (A) ... 12.7 0.5 mm (0.50 0.02 inch) (3) Install four equally spaced bolts (3). Tighten four bolts to preliminary torque. Ensure that lower cap (7) is flush with front frame (6). Measure gap (B) between front frame (6) and upper cap (4) at all four bolts. Use the smallest measurement (B) to determine correct thickness of shims. Install shims (5) of thickness (B) under upper cap (4).Preliminary torque for four bolts (3) ... 88 7 N m (65 5 lb ft)Final torque for eight bolts (3) ... 105 20 N m (77 15 lb ft) (5) 4K-7465 Shim Pack Total thickness of shim pack ... 2.54 0.08 mm (0.100 0.003 inch) Thickness of ten shims ... 0.05 mm (0.002 inch) Thickness of eight shims ... 0.15 mm (0.006 inch) Thickness of one shim ... 0.81 mm (0.032 inch) Inside diameter ... 162.43 mm (6.395 inch) Outside diameter ... 235.0 mm (9.25 inch) (8) Tighten two opposite bolts to preliminary torque. Measure gap (C) between frame (9) and plate (10). Use the smallest measurement (C) to determine correct thickness of shims. Install shims (11) that are the same thickness as measurement (C) minus 0.25 mm (0.010 inch) under the plate. Apply 4C-4030 Thread Lock Compound to the threads of four bolts (7) prior to final installation. Apply final torque in the sequence that is shown.Preliminary torque for two bolts (8) ... 135 14 N m (100 10 lb ft)Final torque for four bolts (8) ... 240 40 N m (177 30 lb ft) (11) 4K-7464 Shim Pack Total thickness of shim pack ... 2.54 0.08 mm (0.100 0.003 inch) Thickness of ten shims ... 0.05 mm (0.002 inch) Thickness of eight shims ... 0.15 mm (0.006 inch) Thickness of one shim ... 0.81 mm (0.032 inch) Inside diameter ... 100.1 mm (3.94 inch) Outside diameter ... 155.5 mm (6.12 inch) (12) Torque for six bolts ... 120 20 N m (89 15 lb ft)