TANK & MTG GP-HYDRAULIC 3967140 - Caterpillar

Display
Within the "Production Measurement Application", select the "Site Configuration" icon (see below).
Illustration 1 g03822139
The "Site Configuration" icon is located in the center of the screen (see arrow).
The "Site Configuration" menu displays the current configurations for:
Truck IDNote: If the "Automatic ID" feature is enabled, the "Site Configuration" menu is displayed when the "Truck Store" key is selected.Select An ID Configuration
Process to select or change an "ID Configuration":
Navigate to the "Site Configuration" menu. (See Illustration 1.)
Use the keypad to highlight the "ID Configuration" to be changed. Press the "OK " function key.
Select the desired ID information. Press the "OK" function key. Edit An ID Configuration
Process to edit an "ID Configuration":
Navigate to the "Production Measurement" menu. The following ID lists can be edited:
Truck ID List
Use the cursor/keypad to select the desired ID list to edit. Press the "OK" function key when selected.
Use the keypad to edit an item and/or parameter. Press the "OK" function key when complete. Automatic ID Feature
The operator can enable or disable the "Automatic ID" feature by navigating to the "Operating Mode" menu from the "Cat"® "Production Measurement Menu" screen.Follow the steps below for specific instructions:
Use the keypad to select "Automatic ID Feature". Press the "OK" function key.
Use the keypad to select ENABLED or DISABLED.
Press the "OK" function key to confirm your selection.