parts catalog

TANK A.-FILLER 7B0099 - Caterpillar

7B0099 TANK A.-FILLER Caterpillar parts TANK
Alternative (cross code) number:
Caterpillar 7B0099 TANK A.-FILLER

Buy TANK A.-FILLER 7B0099 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 421-5663 Lifting Eye Assembly 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02036315
Install integral seal (5).
Illustration 2 g03050220
If the 397-4038 Valve Lifter (3) is being used, install dowels (3A) into the cylinder block.
Illustration 3 g02036314
Illustration 4 g02036313
Attach Tooling (A) and a suitable lifting device onto valve lifter (3). Position valve lifter (3) onto the engine. Install bolts (4). Tighten bolts (4) to a torque of 55 10 N m (41 7 lb ft).
Position manifold shield (1) and install the washers and bolts (2).
Repeat Steps 1 and 3 for the manifold shield and the remaining valve lifters.End By:
Install the exhaust manifolds.
Install the rocker shaft and pushrods.

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.