parts catalog

TERMINAL 0002619 - Caterpillar

0002619 TERMINAL Caterpillar parts TERMINAL
Alternative (cross code) number:
Caterpillar 0002619 TERMINAL

Buy TERMINAL 0002619 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Operation Description:As the operator presses the buttons for the accelerate/decelerate, the speed display does not respond properly.The possible causes of this failure are listed below:
The voltage supply J1-69 (wire 709-OR) to the display is open.
The return circuit J1-70 (wire J764-BR) is open.
The signal circuit J2-20 (wire 899-BU) is shorted to the + battery.
The signal circuit J2-20 (wire 899-BU) is open or the speed display is disconnected.
The speed display has failed.
The ECM has failed. This is unlikely. Test Step 1. CHECK THE SUPPLY CIRCUIT FOR THE SPEED DISPLAY AT THE ECM.
Place the disconnect switch and the key start switch in the ON position.

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.