AVSPARE.COM
parts catalog

TOOL-PSNG 4646923 - Caterpillar



4646923 TOOL-PSNG Caterpillar parts TOOL
Rating:
61
Alternative (cross code) number:
CA4646923
464-6923
4646923
Caterpillar 4646923 TOOL-PSNG
Weight: 11 pounds 5 kg.

Buy TOOL-PSNG 4646923 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Use a Vernier scale height gauge, or a similar tool, in order to measure the dimensions in Step 33.i.
Illustration 39 g00586062
Measure the distance from the top of the surface plate to the top of Tooling (J). Record this dimension as Dimension (X). Measure the distance from the top of Tooling (J) to the top of retainer plate (18). Record this dimension as Dimension (W).
Table 2
CALCULATION    
Subtract Dimension (W) from Dimension (X) in order to obtain Dimension (Y).    
Dimension (Y) is the Lift Off Limitation Height.    Note: The correct Lift Off Limitation Height is 99.96 0.10 mm (3.935 0.004 inch). Call this height Dimension (Z).
Table 3
CALCULATION    
Subtract Dimension (Y) from Dimension (Z) in order to obtain the thickness of shim (20). This will provide the correct Lift Off Limitation Height.    
Illustration 40 g01331627
Install shims (20). Refer to Step 33.i.
Illustration 41 g01331626
Install retainer (19) on the shim. Install retainer plate (18). Install pistons (17) .
Illustration 42 g00681514
Wrap a piece of nylon string around the pistons, as shown.
Illustration 43 g01331857
Lower rotating group (16) into the housing. Use the nylon string in order to hold the rotating group together during the installation. Remove the string.
Illustration 44 g01331623
Install valve (15) and the O-ring seal. Install cap (14) .
Install plug (13) .
Illustration 45 g01331621
Install valve (12) and the O-ring seals.
Illustration 46 g01331620
Install valve (11) and the O-ring seals.
Illustration 47 g01222185
Install O-ring seal (10) and install O-ring seal (9). Install port plate (8) .
Illustration 48 g01222184
Position head assembly (7) and install bolts (6) .
Illustration 49 g01222182
Install O-ring seal (5) .
Illustration 50 g01222171
Install O-ring seal (4). Install coupling (3). Position flange (2) and install bolts (1) .End By: Install the piston pump. Refer to Disassembly and Assembly, "Piston Pump (Winch) - Install".


Parts tool Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.