parts catalog

TOOL AS 4646932 - Caterpillar

4646932 TOOL AS Caterpillar parts TOOL
Alternative (cross code) number:
Caterpillar 4646932 TOOL AS
Weight: 10 pounds 4 kg.

Buy TOOL AS 4646932 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Removal Procedure
Table 1
Tools Needed    
Tool     Part Number     Part Description     Qty    
A     1U-9200     Lever Puller Hoist     1    Start By:
Remove the floorplate. Refer to Disassembly and Assembly, "Floorplate - Remove and Install".
Remove the piston pump. Refer to Disassembly and Assembly, "Piston Pump (Implement)".Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01333034
Remove block assembly (1) .
Illustration 2 g01333037
Disconnect hose assemblies (2) .
Illustration 3 g01333039
Disconnect hose assemblies (3) . Disconnect harness assemblies (4) . Remove bolts (5) .
Illustration 4 g01333049
Disconnect five hose assemblies (6) and position the hose assemblies aside. Remove bolt (7) .
Illustration 5 g01333056
Disconnect hose assemblies (8) .
Attach Tooling (A) and a suitable lifting device to the piston pump (9) . The weight of the piston pump (9) is 45.4 kg (100 lb).
Illustration 6 g01333061
Remove bolts (10) . Remove piston pump (9) .

Parts tool Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.