TRACK GP 1246224 - Caterpillar

HOLD (3) - Move the lever to position (3) in order to stop movement of the loader bucket. When you release the lever from any position except for the FLOAT position, the lever will return to the HOLD position.
RAISE (4) - Move the lever to position (4) in order to raise the loader bucket.
TILT BACK (5) - Move the lever to position (5) in order to rack back the loader bucket.
RETURN-TO-DIG (6) - Move the lever to position (6) in order to return the loader bucket to the dig position. The lever will stay in this position until the bucket is level. Then, the lever will automatically return to the HOLD position.
DUMP (7) - Move the lever to position (7) in order to empty the loader bucket.Multipurpose Bucket Function
Mechanical Control
Illustration 3 g02469756
OPEN BUCKET CLAM (1) - Move the lever to this position in order to open the bucket clam.HOLD (2) - Move the lever to this position in order to stop the movement of the bucket clam. The lever will return to the HOLD position when you release the lever from any position.
CLOSE BUCKET CLAM (3) - Move the lever to this position in order to close the bucket clam.Pilot Control
Illustration 4 g01450786
OPEN BUCKET CLAM (1) - Move the switch to this position in order to open the bucket clam.HOLD (2) - Move the switch to this position in order to stop the movement of the bucket clam. The switch will return to the HOLD position when you release the switch from any position.
CLOSE BUCKET CLAM (3) - Move the switch to this position in order to close the bucket clam.Auxiliary Functions
Pilot Control
Illustration 5 g01450789The multipurpose switch controls the function of a work tool.ON (1) - Move the switch to this position in order to pressurize the hydraulic line on the right side of the machine.OFF (2) - Move the switch to this position in order to turn off the hydraulic lines.ON (3) - Move the switch to this position in order to pressurize the hydraulic line on the left side of the machine.Note: The operation of the controls will vary depending on the work tool. While you operate the machine and the work tool slowly in an open area, check the operation of all controls for the work tool.Transmission Neutralizer Button
Illustration 6 g02469758
Transmission Neutralizer Button for the mechanical loader control
Illustration 7 g01450792
Transmission Neutralizer Button for the pilot loader control
Transmission Neutralizer Button - Push the button and hold the button when all available engine power is desired for the loader hydraulics. This will disengage the transmission from the driving wheels. Each momentary depression downshifts the transmission by one gear.