parts catalog

TRACK G.-18 2H9333 - Caterpillar

2H9333 TRACK G.-18 Caterpillar parts TRACK
Alternative (cross code) number:
Caterpillar 2H9333 TRACK G.-18
Weight: 5 pounds 2 kg.

Buy TRACK G.-18 2H9333 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Primary Exit
Illustration 1 g01260321
(1) Latch pin The rear window in the machine serves as the primary alternate exit. The window will need to be removed in order to use the primary alternate exit. Pull on the ring at the top of the window in order to remove the window. This will remove the seal that holds the window in place. When the seal is taken out, carefully remove the window.Secondary Exit
Illustration 2 g01260322
(2) Release levers for the hinge
(3) Quick release for the strut
(4) Door Latch
Illustration 3 g01260324If necessary, the cab door may be removed from the hinges from the inside of the machine. Use the following procedure:
Release the door from the striker (4).
Use the two levers (2) in order to release the hinge. Move the upper lever counterclockwise. Move the lower lever clockwise.
Locate the quick release (3) on the end of the support strut. Move the quick release to the left and hold the quick release.
Push up on the strut in order to release the strut from the mount.
Push the door away from the cab.

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.