parts catalog

TRACK AR 3534433 - Caterpillar

3534433 TRACK AR Caterpillar parts TRACK
Alternative (cross code) number:
Caterpillar 3534433 TRACK AR

Buy TRACK AR 3534433 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Note: A New specification is the performance that can be expected for a new machine. A Rebuild specification is the performance that can be expected after rebuilding the components of a system. Performance beyond the Service Limit is an indication of these problems: improper maintenance or adjustment, component wear and failure.
Table 2
Corresponding Engine RPM and Torque Output for Each Engine Speed Dial Position (No Load Condition)
Engine Speed Dial Position High Hydraulic Power Mode Economy Mode
Engine RPM Torque Output (%) Engine RPM Torque Output (%)
1 950 20.0 950 20.0
2 1080 35.0 1080 35.0
3 1160 47.0 1160 47.0
4 1230 55.0 1230 55.0
5 1310 61.0 1310 61.0
6 1420 68.0 1390 68.0
7 1510 76.0 1470 74.0
8 1580 82.0 1520 79.0
9 1640 91.0 1560 81.0
10 1700 100.0 1600 83.0 Introduction
The following test is used to measure engine speed at the flywheel housing.Required Tools
Illustration 1 g02535237
Tooling (C)
348-5430 Multi-Tool Gp
Table 3
Tooling Item Part
Number Description QTY
C 348-5430 Multi-Tool Gp
C1 285-0908 Multi-Tool 1
C2 6V-2198 Cable As 1
C3 9U-5140 Photo Pickup 1
C4 6V-3137 Base 1
C5 1U-6605 Reflective Tape 1
C6 6V-3138 Extension 1 Reference: Refer to Tool Operating Manual, NEHS1087 for operating instructions for the 348-5430 Multi-Tool Gp.Note: Use Software License Card, NETG5049 with part number 348-5430 Multi-Tool Gp.Machine Preparation
Position the machine on level ground.
Stop the engine.
Install tooling (C) on the engine. Test Procedure
Start the engine.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Read the engine speed display (rpm) on the multi-tool. Refer to Table 1 for the specifications for engine speed at the desired engine operation.

Parts track Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.