AVSPARE.COM
parts catalog

TUBE AS 1246086 - Caterpillar



1246086 TUBE AS Caterpillar parts 515, 525 TUBE
Rating:
70
Alternative (cross code) number:
CA1246086
124-6086
1246086
Caterpillar 1246086 TUBE AS
Weight: 1 pounds 0 kg.

Buy TUBE AS 1246086 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL SKIDDER,

Compatible equipment models: 1246086:

WHEEL SKIDDER  515   525   Caterpillar
Number on catalog scheme: 14
 
  For full view, you need register

Information:

Start By:
Remove front idlers and recoil springs.
Sudden release of spring force can cause injury.To prevent the possibility of injury, follow the procedure to relieve the spring pressure.
Thoroughly clean the outside of the recoil spring assembly.
Illustration 1 g00552576
Install Tooling (D) on Tooling (B), as shown.
Illustration 2 g00483435
(1) Adjustable support
Illustration 3 g00552579
Tooling (A)
( 2) Reaction plate
(3) Movable plate
Determine the position for the recoil spring assembly in Tooling (A). Locate adjustable support (1) of Tooling (A) in this position. Level the adjustable support.
Measure the length of the recoil spring assembly. Adjust the space from reaction plate (2) to movable plate (3) in order to fit the measured length.
Illustration 4 g03761737
Remove cotter (4) from nut (5).
Illustration 5 g00552601
Attach a suitable lifting device to recoil spring assembly (6). The weight of the recoil spring assembly is approximately 24 kg (53 lb). Position the recoil spring assembly on adjustable support (1) in Tooling (A). Align the centerline of the recoil spring assembly with the centerline of Tooling (A) by moving the adjustable support.
Illustration 6 g03761877
Use the following procedure to position the recoil spring assembly in Tooling (A).
Level the recoil spring assembly by repositioning the adjustable support.
Position the recoil spring assembly so that nut (5) is centered in the hole of reaction plate (2).
Install two pins (7) on the back side of reaction plate (2), as shown.
Operate Tooling (B) enough to hold the recoil spring assembly in position between reaction plate (2) and movable plate (3).
Be sure that the recoil spring assembly is leveled and centered in Tooling (A).
Illustration 7 g03761916
Close covers (8) on Tooling (A). Operate Tooling (B) and slowly compress the recoil spring assembly until the retaining rod and the nut are free to move.
Illustration 8 g03761877
Locate nut (5) through the opening in Tooling (A). Remove nut (5) and the washer from the retaining rod. Use Tooling (B) and slowly release the force on the recoil spring assembly.
Open covers (8) on Tooling (A). Attach a suitable lifting device to the disassembled recoil spring assembly. Remove the recoil spring assembly from Tooling (A).
Illustration 9 g03761958
Separate the components of the recoil spring assembly. Remove retaining rod (12), support assembly (11), and support (9) from recoil spring (10).

Caterpillar parts catalog:

Caterpillar parts catalog
525 Wheel Skidder 1DN00001-02253 (MACHINE) POWERED BY 3304 Engine
515 Wheel Skidder 4LR00001-UP (MACHINE) POWERED BY 3304 Engine


Parts tube Caterpillar catalog:

2P2547 TUBE AS-GUIDE
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235, 3304B, 3306, 515, 518C, 525, 528B, 530B, 572G, 936, 936F, 950, 966R, ...
2P2697 TUBE AS-AIR VENT
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 215, 235B, 3304, 3304B, 3306, 3306B, 515, 518C, 525, 545, 572G, 572R, 615C...
8N7318 TUBE AS
120B, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 235, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C,...
8N7315 TUBE AS-OUTLET
120B, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 235, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C,...
7X2049 TUBE AS-REFRIGERANT ORIFICE
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 307B, 317B LN, 318B, 322B L, 325B L, 330B L, 345B, 34...
4S8603 TUBE AS-SCREEN
14G, 16G, 24H, 3192, 515, 525, 525B, 611, 613C, 613C II, 613G, 615, 615C, 65, 69D, 7211, 7231, 7241, 7251, 7261, 7271, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776, 777,...
9Y7589 TUBE AS-SCAVENGE
120G, 130G, 3304, 3304B, 515, 517, 518, 518C, 525, 527, 936F, 950B, 963, CB-534, D4E, D4E SR, D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II, G3304
1W1631 TUBE ASSEM.
515, 517, 950B, 963, G936
1N3824 TUBE
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 515, 518C, 525, 527
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.