parts catalog

TUBE 1C4130 - Caterpillar

1C4130 TUBE Caterpillar parts TUBE
Alternative (cross code) number:
Caterpillar 1C4130 TUBE
Weight: 0.60 pounds 0 kg.

Buy TUBE 1C4130 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


1. Remove retainer (2) from the end of the shafts.2. Remove the washers and rocker arms (1). 3. Remove pins (6) that hold the brackets to each end of the shaft. The center bracket does not have a pin.4. Remove bracket (3), rocker arm (4) and spring (5). Assemble Rocker Shaft Assemblies 1102-016
1. Put clean engine oil on the shaft.2. Install the bracket and rocker arms for the center bracket.3. Install spring (1), rocker arm (2) and bracket (3). Install the pin that holds the brackets on each end of the rocker shaft. Install the pin until it extends 12.7 1.0 mm (.50 .04 in)from the surface of the bracket. 4. Install rocker arm (4) on each end of the shaft. Install washers (5) as needed to get an assembled clearance of 0.030 to 1.40 mm (.0012 to .055 in)End By:a. install rocker shaft assemblies and push rods

Parts tube Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.