AVSPARE.COM
parts catalog

TUBE 2332976 - Caterpillar



2332976 TUBE Caterpillar parts M313C, M315C, M316C, M318C, M322C TUBE
Rating:
22
Alternative (cross code) number:
CA2332976
233-2976
2332976
Caterpillar 2332976 TUBE
Weight: 3 pounds 1 kg.

Buy TUBE 2332976 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEELED EXCAVATOR,

Compatible equipment models: 2332976:

WHEELED EXCAVATOR  M313C   M315C   M316C   M318C   M322C   Caterpillar
Number on catalog scheme: 3
 
  For full view, you need register

Information:


Remove bolts (38) and remove torque control (39) .
Disassemble torque control (39) and inspect the spacer, the spring, and the insulator for damage or wear. Replace parts that are worn or damaged with new parts.
Illustration 15 g00453558
Remove two bolts (40) and block (41) .
Illustration 16 g00453559
Remove the bolt that holds collar (42) to bolt (44). Remove collar (42), spring (43) and bolt (44) .
Remove the stop screws from collar (42) if the collar needs to be replaced.
Illustration 17 g00453560
Remove three bolts (46) and remove governor servo (45). The governor servo must be rotated in order to be released from the rack's regulator.
Illustration 18 g00453632
Remove lockring (50), seat (53), link spring (52) and sleeve (51). Remove the other lockring (50) from the groove in the center of valve (47). Remove valve (47), sleeve (48) and piston (49). The piston must be pushed down in order to be removed. Remove the O-ring seal from sleeve (48). Remove pin (55) and lever (56) .
Illustration 19 g00453633
Illustration 20 g00453634
Use Tool (A) in order to hold spring (58) compressed for the removal of ring (57). Spring (58) is used in order to put a preload on the thrust bearing for the camshaft in the fuel injection pump housing.
Remove ring (57) and slowly release Tool (A) .
Illustration 21 g00453635
Remove bearing (60), sleeves (59) and spring (58) .
Illustration 22 g00453636
Remove ring (61) and dashpot assembly (62) .
Illustration 23 g00453637
Use Tool (C) in order to remove snap ring (68). Remove ring (67) and spool (66) .
Remove seat (65) from spring (64) and remove spring (64) from seat (63) .
Illustration 24 g00453665
Remove riser (69) .
Illustration 25 g00453667
Remove ring (70), races (71) and bearing (72) .
Illustration 26 g00453668
Remove four bolts (73) and carrier (74) .
Illustration 27 g00453669
Remove dowels (77) and flyweights (76). Remove governor shaft (75) and the dowel that is not shown from shaft (75) .
Illustration 28 g00453670
Remove races (78) and bearing (79) .

Caterpillar parts catalog:

Caterpillar parts catalog
M318C Excavator BCZ00001-02000 (MACHINE) POWERED BY 3056 Engine
M316C Excavator BDX00001-02000 (MACHINE) POWERED BY 3056 Engine
M322C Excavator BDK00001-02000 (MACHINE) POWERED BY 3056 Engine
M315C EXCAVATOR BDM00001-02000 (MACHINE) POWERED BY 3054 Engine
M313C Excavator BDR00001-02000 (MACHINE) POWERED BY 3054 Engine
M318C Excavator BCZ02001-UP (MACHINE) POWERED BY 3056E Engine
M316C Excavator BDX02001-UP (MACHINE) POWERED BY 3056E Engine
M322C Excavator BDK02001-UP (MACHINE) POWERED BY 3056E Engine
M315C Excavator BDM02001-UP (MACHINE) POWERED BY 3054E Engine
M313C Excavator BDR02001-UP (MACHINE) POWERED BY 3054E Engine
M318C Excavator H2D00001-UP (MACHINE) POWERED BY 3056E Engine
M316C Excavator H2C00001-UP (MACHINE) POWERED BY 3056E Engine
M322C Excavator H2E00001-UP (MACHINE) POWERED BY 3056E Engine
M315C Excavator H2B00001-UP (MACHINE) POWERED BY 3054E Engine
M313C Excavator H2A00001-UP (MACHINE) POWERED BY 3054E Engine


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.