AVSPARE.COM
parts catalog

TUBE AS 3156416 - Caterpillar



3156416 TUBE AS Caterpillar parts C15, TH35-C15T TUBE
Rating:
61
Alternative (cross code) number:
CA3156416
315-6416
3156416
Caterpillar 3156416 TUBE AS
Weight: 0.40 pounds 0 kg.

Buy TUBE AS 3156416 Caterpillar genuine, new aftermarket tractor parts with delivery
PETROLEUM PACKAGE, TRUCK ENGINE,

Compatible equipment models: 3156416:

PETROLEUM PACKAGE  TH35-C15T  
TRUCK ENGINE  C15   Caterpillar
Number on catalog scheme: 7
 
  For full view, you need register

Information:


Illustration 1 g00917007
Schematic of the Pressure Switch (Right Stabilizer)A diagnostic code is recorded when a loss of signal is recorded by the pressure switch (right stabilizer).Test Step 1. CHECK THE SWITCH
At the switch, measure the resistance from frame ground to the input of the pressure switch while the stabilizer is NOT activated.
At the switch, measure the resistance from frame ground to the input of the pressure switch while the stabilizer is activated.Expected Result:The measured resistance at the switch should be greater than 5,000 ohms while the stabilizer is NOT activated. The measured resistance at the switch should be less than 5 ohms while the stabilizer is activated.Results:
OK - The measured resistance at the switch is greater than 5,000 ohms while the stabilizer is NOT activated. The measured resistance at the switch is less than 5 ohms while the stabilizer is activated. The switch is correct. The machine harness is not correct.Repair: Repair the machine harness or replace the machine harness. Stop.
NOT OK - The measured resistance at the switch is NOT greater than 5,000 ohms while the stabilizer is NOT activated. The measured resistance at the switch is NOT less than 5 ohms while the stabilizer is activated. The switch is NOT correct.Repair: Replace the switch. Stop.Test Step 2. VERIFY THAT THE DIAGNOSTIC CODE IS PRESENT.
Turn the key start switch to the OFF position.
Inspect the connectors and inspect the contacts.
Connect the machine harness to the control module.
Turn the key start switch to the ON position.
Enter the service mode.
Operate the machine.
Check for active diagnostic codes. Note the active diagnostic codes.Expected Result:The diagnostic code is active.Results:
YES - The diagnostic code is active. The condition has not been corrected. The ECM may have failed. Proceed to test step 3.
NO - The diagnostic code is not active. The diagnostic code was caused by a poor electrical connection.Repair: Clear the diagnostic code. Stop.Test Step 3. VERIFY THAT THE ECM HAS FAILED.
Connect the machine harness to the control module.
Turn the key start switch to the ON position.
Verify that the diagnostic code is present. Verify that the diagnostic code is active.
Turn the key start switch to the OFF position.
Turn the key start switch to the ON position.
Verify that the diagnostic code is present. Verify that the diagnostic code is active.Expected Result:The diagnostic code is active.Results:
YES - The diagnostic code is active. The ECM has failed. Repair: Replace the ECM. Refer to Testing and Adjusting, "Electronic Control Module (ECM) - Replace". Stop.
NO - The diagnostic code is not active. Clear the diagnostic code. Stop.

Caterpillar parts catalog:

Caterpillar parts catalog
C15 On-highway Engine SDP00001-UP
C15 ON-HIGHWAY ENGINE B5R00001-UP
TH35-C15T Petroleum Package PBL00001-UP POWERED BY TH35-C15T PETROLEUM


Parts tube Caterpillar catalog:

2644289 TUBE-OIL FILLER
3116, 3126, 3126B, 3126E, 3176, 3406E, 75C, 815B, 85C, C-10, C-12, C-15, C-16, C11, C13, C15, C7, C9, CX31-C13I, CX31-C9I, TH31-E61, TH35-C11I, TH35-C13I, TH35-C15T
1152359 TUBE AS
3406B, 3406C, 3406E, 3456, 770, 770G, 770G OEM, 824C, 824G, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G II, 826H, 826K, 980G, 980G II, 980H, 986H, AD55, C-15, C-16, C-18, C15, C16, C18, CX31-C15I, ...
4S8603 TUBE AS-SCREEN
14G, 16G, 24H, 3192, 515, 525, 525B, 611, 613C, 613C II, 613G, 615, 615C, 65, 69D, 7211, 7231, 7241, 7251, 7261, 7271, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776, 777,...
2764637 TUBE AS-OIL JET
365C, 365C L, 365C L MH, 374D L, 374F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 637D, 651B, 657E, 657G, 735, 735B, 740, 740B, 770, 770G, 770G OEM, 824C, 824H, 824K, 825H, 825K, 826H, 826K, 98...
2919948 TUBE AS
C15, TH35-C15T
2955510 TUBE AS
C15, TH35-C15T
3280851 TUBE AS
C15, TH35-C15T
2906554 TUBE AS
C15, TH35-C15T
2850202 TUBE AS
C15, TH35-C15T
2893993 TUBE AS
C15, TH35-C15T
3111529 TUBE AS
C15, TH35-C15T
3111528 TUBE AS
C15, TH35-C15T
3046793 TUBE AS
C15, TH35-C15T
2978176 TUBE AS
C15, TH35-C15T
2889166 TUBE AS
C15, TH35-C15T
2858924 TUBE AS
C15, TH35-C15T
2877473 TUBE AS
C15, TH35-C15T
2877472 TUBE AS
C15, TH35-C15T
2877471 TUBE AS
C15, TH35-C15T
2799459 TUBE AS
C15, TH35-C15T
2799456 TUBE AS
C15, TH35-C15T
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.