parts catalog

TUBE AS 3156652 - Caterpillar

3156652 TUBE AS Caterpillar parts C13, TH35-C13T TUBE
Alternative (cross code) number:
Caterpillar 3156652 TUBE AS
Weight: 0.40 pounds 0 kg.

Buy TUBE AS 3156652 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 3156652:

TRUCK ENGINE  C13   Caterpillar
Number on catalog scheme: 5
  For full view, you need register


Operational Information
The in-line ripper is designed for primary tillage. The implement fractures the layer of the soil that is compacted. However, little soil disturbance is caused to the surface residue. The implement reduces soil erosion.The positive effects of ripping include these important factors:
Improved soil tilth
Enhanced root penetration
Increased utilization of nutrients
Low incorporation of the soil residue
Illustration 1 g00778895
The ripper shank can be equipped with a low disturbance shank cap (1). The low disturbance shank cap provides a narrow profile for inter-row ripping.
Illustration 2 g00778859
The ripper shank can be equipped with a shattering wing (2). The shattering wing provides maximum subsoil fracturing between the shanks. The ripper shanks that are equipped with a reset spring should be used when the implement is used in a soil that has obstructions.Operating Speeds
The implement can be pulled from 4.8 km/h (3 mph) to 9.7 km/h (6 mph). The speed of the implement should be reduced in extremely hard conditions or rocky conditions.Horsepower Requirements
Belted Agricultural Tractors
A belted agricultural tractor must have the following horsepower per shank in order to operate the in-line ripper.
18 kW (25 hp) to 33 kW (45 hp)Wheel Tractors
A tractor that is driven by wheels must have the following horsepower per shank in order to operate the in-line ripper.
22 kW (30 hp) to 37 kW (50 hp)Operating Depth
The depth of the implement should be adjusted so the tip of the ripper is 50.8 mm (2 inch) below the compacted zone. The compacted zone is generally between 178 mm (7 inch) to 254 mm (10 inch). The compacted zone is seldom deeper than 279 mm (11 inch).The maximum operating depth is 406 mm (16 inch).

Caterpillar parts catalog:

Caterpillar parts catalog
C13 On-Highway Engine LEE00001-UP
C13 Euro IV Truck Engine S3C00001-UP
TH35-C13I Petroleum Package LEE00001-UP POWERED BY C13 Engine

Parts tube Caterpillar catalog:

14G, 16G, 24H, 3192, 515, 525, 525B, 611, 613C, 613C II, 613G, 615, 615C, 65, 69D, 7211, 7231, 7241, 7251, 7261, 7271, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776, 777,...
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730, 730C, 966H, 972H,...
2725785 TUBE AS
C13, TH35-C13T
2839838 TUBE AS
C13, TH35-C13T
2738696 TUBE AS
C13, TH35-C13T
3161203 TUBE AS
C13, TH35-C13T
2922479 TUBE AS
C13, TH35-C13T
2813256 TUBE AS
C13, TH35-C13T
2876464 TUBE AS
C13, TH35-C13T
2890708 TUBE AS
C13, TH35-C13T
3214338 TUBE AS
C13, TH35-C13T
3156651 TUBE AS
C13, TH35-C13T
3055641 TUBE AS
C13, TH35-C13T
2978170 TUBE AS
C13, TH35-C13T
2978169 TUBE AS
C13, TH35-C13T
2978168 TUBE AS
C13, TH35-C13T
2880814 TUBE AS
C13, TH35-C13T
3003272 TUBE AS
C13, TH35-C13T
3003270 TUBE AS
C13, TH35-C13T
3083434 TUBE AS
C13, TH35-C13T
3015605 TUBE AS
C13, TH35-C13T
2978175 TUBE AS
C13, TH35-C13T
2940593 TUBE AS
C13, TH35-C13T
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.