parts catalog

TUBE AS 3157211 - Caterpillar

3157211 TUBE AS Caterpillar parts TUBE
Alternative (cross code) number:
Caterpillar 3157211 TUBE AS

Buy TUBE AS 3157211 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 7 g02545096
Open engine compartment cover (10) .
Illustration 8 g02545098
Disconnect the charge supply hose to the left material feed pump at fitting (12) from tee fitting (11) .
Plug fitting (12) with Tool (D) and Tool (E) . Cap tee fitting (11) with Tool (F) .
Assemble two sets of Tool (A) and two sets of Tool (B) . Connect one Tool (A) to each Tool (B) .
Illustration 9 g02545100
Install one Tool (B) on charge pressure tap (13) on the right material feed pump.
Illustration 10 g02545103
Install other Tool (B) on case drain tap (14) on the right propel pump.
Move engine start switch (8) to the START position. Release the engine start switch when the engine starts.
Operate the engine at low idle for a few minutes.
Move throttle control switch (7) to the HIGH IDLE position twice. For each switch actuation, hold the switch in this position for

Parts tube Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.