AVSPARE.COM
parts catalog

TUBE AS 3157498 - Caterpillar



3157498 TUBE AS Caterpillar parts TUBE
Rating:
16
Alternative (cross code) number:
CA3157498
315-7498
3157498
Caterpillar 3157498 TUBE AS

Buy TUBE AS 3157498 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Use Tooling (D) and a suitable lifting device in order to remove planetary carrier (95) from output shaft assembly (112). The weight of planetary carrier (95) is approximately 52 kg (115 lb).
Illustration 69 g00395479
Remove sun gear (113) from output shaft assembly (112).
Illustration 70 g00395480
Remove hub (114) from output shaft assembly (112). The weight of hub (114) is approximately 20 kg (45 lb).
Illustration 71 g00395481
Remove dowel (116) from output shaft assembly (112). Remove bearing sleeve (115) from each end of output shaft assembly (112). The weight of output shaft assembly (112) is approximately 27 kg (60 lb).
Illustration 72 g01445422
Use Tooling (H) in order to remove retaining ring (117) from planetary carrier (95).
Illustration 73 g01443216
Use Tooling (F) in order to remove bearing (118) (not shown) from planetary carrier (95).
Illustration 74 g00395617
Use a suitable punch in order to push spring pin (119) inside planetary shaft assembly (120). Tap planetary shaft assembly (120) from planetary carrier (95).
Illustration 75 g00395618
Remove thrust discs (121), planetary gear (122), roller bearing (123), and spring pin (119) from planetary shaft assembly (120).
Repeat Steps 82 and 83 for the remaining planetary gears (122).
Illustration 76 g00395621
Remove O-ring seals (124) from housing assembly (125).
Illustration 77 g00395719
Remove dowels (126) from housing assembly (125).
Illustration 78 g00395720
Turn housing assembly (125) onto the opposite side, as shown. Remove bolts (127) from bearing cage (128).
Illustration 79 g01443222
Use Tooling (C) in order to separate bearing cage (128) from housing assembly (125). Remove dowel (129) and plug (130). Remove bearing cage (128) from housing assembly (125).
Illustration 80 g00396197
Remove retaining ring (131) from bearing cage (128).
Illustration 81 g00396218
Use a suitable hammer in order to tap bearing (132) from bearing cage (128). Remove O-ring seals (133) from bearing cage (128).


Parts tube Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.